CodeWarrior Development ToolsのトピックRe: My CAN interrupt is not getting on

My CAN interrupt is not getting on

kdn — Sun, 22 Mar 2015 04:04:15 GMT

My CAN interrupt is not getting on, Is there something I am missing?

Re: My CAN interrupt is not getting on

Martin35804 — Wed, 25 Mar 2015 14:30:16 GMT

Hi,

Try to create it again in the PE.

Otherwise I would suggest to avoid PE and write bareboard project from scratch.

Re: My CAN interrupt is not getting on

Martin35804 — Thu, 26 Mar 2015 10:31:30 GMT

That means to avoid the PE generation of the source file for the CAN peripheral. Or try to recreate it again in the project, but when you will get the same result with the generation of ISR I would suggest to create the ISR source file.

This is an example of bareboard project:

FXAS21000 – Bare metal Example project

means without use of PE. This one is created in CodeWarrior 10.6

Re: My CAN interrupt is not getting on

iggi — Thu, 26 Mar 2015 14:13:08 GMT

It's a new project in CodeWarrior IDE.

File -> New -> Bareboard project -> and so on...

'From scratch' means start at the beginning with no advantage, start from nothing.

Re: My CAN interrupt is not getting on

kdn — Thu, 26 Mar 2015 15:43:45 GMT

I am using this version, is this possible in it.

Re: My CAN interrupt is not getting on

ZhangJennie — Fri, 27 Mar 2015 06:20:47 GMT

Hi KDN,

regarding to your original problem of generating ISR code. this is normal if you use init_MSCAN component.

i suggest you use FreescaleCAN component instead.

see attached video I just made,

Have a great day,
Zhang Jun

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: My CAN interrupt is not getting on

ZhangJennie — Mon, 30 Mar 2015 02:32:36 GMT

Hi KDN,

yes, you should be able to get FreescaleCAN component in "component library"

please note, FreescaleCAN is only available for professional license.

the related demo code is under: {CW5.1 install folder}\ProcessorExpert\Projects\Test projects\CAN

Have a great day,
Zhang Jun

Re: My CAN interrupt is not getting on

christianhdz — Fri, 05 May 2017 15:36:08 GMT

What is the difference between using "FreescaleCAN" and "Init_MSCAN"?

Re: My CAN interrupt is not getting on

ZhangJennie — Mon, 08 May 2017 01:53:39 GMT

Hi Juan

Init_MSCAN if for peripheral initialization. FreescaleCAN component includes all the feature of Init_MSCAN components, besides, it also includes selectable methods for the component runtime API.

Init_MSCAN is supported by all kinds of CW license.

FreescaleCAN is only supported by professional edition license.

Have a great day,
Zhang Jun