CodeWarrior Development ToolsのトピックRe: invalid project path duplicate path entries found

invalid project path duplicate path entries found

kleckerspur — Tue, 02 Sep 2014 14:38:00 GMT

Hello,

I only want to compile the mqx-libraries. And the following warning happens:

invalid project path duplicate path entries found

Can anyone help?

The following appears in the Problems window:

Description Resource Path Location Type

Invalid project path: Duplicate path entries found (/bsp_twrmcf52259 [Include path] isSystemInclude:true includePath:C:/Freescale/CW MCU v10.5/MCU/ColdFire_Support/ewl/EWL_C/include), path: [/bsp_twrmcf52259]. bsp_twrmcf52259 pathentry Path Entry Problem

thanks

Ms. Piggy

Re: invalid project path duplicate path entries found

kleckerspur — Wed, 03 Sep 2014 08:40:02 GMT

Well then?

Re: invalid project path duplicate path entries found

Carlos_Musich — Thu, 04 Sep 2014 15:55:26 GMT

Hi!

Check in menu Project > Properties > C/C++ Build > Settings > >ColdFire Compiler > Input and also menu Project > Properties > C/C++ Build > Settings > >ColdFire Linker > Input that you dont have duplicated include paths

If your problem persists I recommend to move to CW10.6 or submit a Service Request at www.freescale.com/support

Regards,

Carlos

Re: invalid project path duplicate path entries found

kleckerspur — Fri, 05 Sep 2014 07:12:17 GMT

The problerm happens with 10.6

Re: invalid project path duplicate path entries found

kleckerspur — Fri, 05 Sep 2014 07:40:23 GMT

It seems to work. There were duplicated pathes in user- and system path.

If you have a lot of includes in the user path, it is very difficult to find out

Is there an easy way to find out which duoblicated items in there. or to save the whole stuff, to bring it restore it afterwards ?