topic Debugger error in Classic/Legacy CodeWarrior

Debugger error

ni — Thu, 04 May 2006 12:34:21 GMT

We are programing Freescale 56F8357 DSP in Metrowerks CodeWarrior IDE.

Our problem, derives from 2 Code Warrior IDE versions that we are using. Until now, we are working with two licenses:

- One fix license: CodeWarrior 56800/E Hybrid Controllers version 6.1.2

- Another floating license: CodeWarrior 56800/E Hybrid Controllers version 7.0

Up to now, we have debugged a program "bootloader.c" in version 6.1.2 without problems. But now, we have tried to debug using version 7.0 and we don´t arrive. Each time that we try to debug (we have Compiled and "Make" without problems), it appears a message saying "CCSProtocolPluging. CCS: Invalid Parameter".

We have changed our parallel port in CCS console (we have put address 0x0378) and message from CodeWarrior debugging has changed: "CCSProtocolPlugin: Unknown protocol error".

But after accepting this message, it appears again the message: "CCSProtocolPluging. CCS: Invalid Parameter".

- What could we do? What could be the solution for this problem?

We will really thank you your help with this item.

Re: Debugger error

marc_paquette — Fri, 05 May 2006 20:31:49 GMT

The cause of the problem might be conflicts with your parallel port. Is another application or service using it?

Alternately, this thread might help:

http://forums.freescale.com/freescale/board/message?board.id=CWCOMM&message.id=518

Let me know if the problem persists.

Marc.

Re: Debugger error

kanu__ — Thu, 04 Nov 2010 16:47:14 GMT

hi,

I am also facing the same error in Code warrior 3.0 for MSC 8122 ADS proeject download.

Here the link you provided is not working.

http://forums.freescale.com/freescale/board/message?board.id=CWCOMM&message.id=518

__Kanu

Re: Debugger error

J2MEJediMaster — Thu, 04 Nov 2010 20:09:25 GMT

Try this link instead: https://community.freescale.com/message/11176#11176. I hope this helps.

---Tom

Re: Debugger error

kanu__ — Mon, 08 Nov 2010 13:13:18 GMT

No. I am getting the same error again when i trying to download to 8122 board in CW 3.0.

The interesting thing is that , i can download into my 8101 and 8144 board using the same usb tap and code warrior versions in the same PC now also with out any problem.

Earlier(2 weeks earlier) i had tested(had downloaded) the 8122 board with the same settings but i don't know what happened(no change in project) now.

Please help me out

__Kanu