topic Re: Cyclone Universal programing CW6.3 s-record file issue in Classic/Legacy CodeWarrior

Cyclone Universal programing CW6.3 s-record file issue

dannydeng — Sun, 28 May 2017 13:35:01 GMT

Dears,

I found the issue when I use Cyclone Universal programing CW6.3 s-record file of S9S08DZ60F2MLH, it appeared some mistake 0x00003003 at the Flash address 0x0000F400. While programing CW10.x s-record file, it is well.

Can anybody give any advice?

Thanks and best regards,

Ray Deng,

Re: Cyclone Universal programing CW6.3 s-record file issue

ZhangJennie — Wed, 31 May 2017 05:56:36 GMT

Hi Ray,

If your srecord file is generated by CW, please verify the file with CW debugger if its function is correct.

If yes, srecord file is fine. I suggest you contact Cyclone Universal producer P&E.

PEmicro - P&E Microcomputer Systems: Over 30 years as an Industry leader in Embedded Systems Development Tools, debug pr…

Have a great day,
Jennie Zhang

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: Cyclone Universal programing CW6.3 s-record file issue

dannydeng — Wed, 31 May 2017 12:16:57 GMT

Hi Jennie,

Thanks for your kinldy suggestion.

I will check it.

Thanks and best regards,

Ray Deng

Re: Cyclone Universal programing CW6.3 s-record file issue

ZhangJennie — Fri, 02 Jun 2017 07:21:30 GMT

You are welcome!

Have a great day,
Jennie Zhang