topic Re: How-to Add missing derivatives to CodeWarrior Classic HCS12(X) 5.2 (Unofficial Method) in Classic/Legacy CodeWarrior

How-to Add missing derivatives to CodeWarrior Classic HCS12(X) 5.2 (Unofficial Method)

RodneyMcGee — Sun, 17 Jul 2016 14:02:51 GMT

The Good and the Bad about CodeWarrior Development Studio for HCS12(X) Microcontrollers (Classic IDE) v5.2

Removed more than half of the supported chips for "market reasons" (see table below)
Updated P&E drivers for Windows 8 & 10 (but they are already out of date again)
Removed some other connections (SofTec, Serial monitor, Abatron, TBDML)
- If you need these you have to use 5.1 (see this post 430483#comment-877065 )
Includes all 5.1 updates
Updated ProcessorExpert to 3.06 (not in release notes)
- Fixed Device Initialization issue for S12X clock initialization
- Fixed API pre-scaler range in Timer Int component for MC9S12XE derivatives

The Unofficial Workaround – have your cake and eat it too

NOTE: This is NOT supported by NXP, but this article is how to make it WORK anyway . Do not contact Freescale support when you modify your installation files. Ask your questions here on the forum about this process. Also SofTec, TBDML, Abatron, etc... and the other older connection options will still NOT work because the makers of those devices have not wrote modern OS drivers. Serial debugger is also not currently available with my workaround. Your options are P&E tools and USBDM for programmer/debuggers.

A. Install CW 5.2

If you have not already here is a link to the special edition of 5.2

https://cache.nxp.com/lgfiles/devsuites/HC12/CWS12v5.2_Win_b151201_se.exe

B. Download Missing Pieces

See attachment "cw 5 2 missing pieces v3.zip" at the bottom

(see hashes at the bottom; there is no .exe in zip, download from nxp community forum)

Includes the missing xml,c,h files from CW5.1 and service packs
Updated P&E prog files - dated 10 April 2018 (which is newer than what comes with CW5.2)
A few newer versions of derivative header files

Note: My zip includes some updated files. See the explanation in this video link

C. Merge files in CWS12v5.2 Program Files

Confirm CodeWarrior is closed and not running

You need administrator rights or login info to do these steps

Instructions for Windows Vista, Windows 7, Windows 8 / 8.1, Windows 10:

Extract the attached zip (see bottom of post), so that you have three folders.

Select and Drag the 3 folders (Bin,Lib,Prog) into the CWS12v5.2 folder probably in C:\Program Files...

It will ask merge the files from the folders (overwriting some – answer yes)

See the video to make sure you do this right (not for XP): Video Instructions (YouTube)

Instructions for Windows XP:

Note: In Windows XP the default behavior is to overwrite and delete folders NOT merge them, so we use the 7-zip method which actually works for all.

Install and Open 7zip (as a Admin user)

Navigate to and open attached zip file within the 7zip main interface (you should see the Bin,Lib,Prog folders)

Click Extract and select your main CW5.2 installation folder eg C:\Program Files\CWS12v5.2 as the "Copy to:"

7zip will prompt you to overwrite a few files (answer, yes)

D. Processor Expert (if needed)

See attachment (at the bottom of the post) "PE config older chips.zip"

Extract this zip and replace these four files in your C:\Program Files\CWS12v5.2\ProcessorExpert\Config folder overwriting the files.

E. Install latest P&E Drivers (if needed)

Install the latest P&E Hardware Interface Drivers, Version 12 (Win XP/Vista/7/8/10)

If you have issues read this FAQ

F. USBDM (if needed)

I am personally use a Wytec USBDM with the latest software and it works great . Consider it because they are a faction of the price of other programmers and are open source hardware and software. They are also available quite cheap on eBay, BUT do not use the software that comes with them, throw the CD away, and download the official latest software below.

https://sourceforge.net/projects/usbdm/files/ to get

USBDM_4_12_1_230_Win_i.msi or newer

And ONE of these:

USBDM_Drivers_4_12_3_Win_x64.msi or newer (for 64-bit 7 and 10)

or USBDM_Drivers_4_12_3_Win_x32.msi or newer (for 32-bit 7 and 10)

or USBDM_Drivers_4_12_3_WinXP_x32.msi or newer (for XP)

Don't forget to update your USBDM firmware.

Here is a video for CW5.1, but the process is similar CodeWarrior HCS12(X) Install and Update USBDM - YouTube

Table of missing derivatives

	Supported Derivatives CodeWarrior S12(X) 5.1 (with all service packs) and CW 5.2 after following STEPs above		Supported Derivatives CodeWarrior S12(X) 5.2 (default installation)
	HC12
	Automotive Family
	MC68HC812A4
	MC68HC912B32
	MC68HC912D60
	MC68HC912D60A
	MC68HC912DG128
	MC68HC912DG128A
	MC68HC912DT128
	MC68HC912DT128A
	HCS12 9S12 S12 MC9S12		HCS12
	HCS12A MC9S12A S12A Family
	MC9S12A128B HCS12A128B S12A128B
	MC9S12A256B HCS12A256B S12A256B
	MC9S12A32 HCS12A32 S12A32
	MC9S12A64 HCS12A64 S12A64
	MC9S12A512 HCS12A512 S12A512
	HCS12B MC9S12B S12B Family
	MC9S12B64 HCS12B64 S12B64
	MC9S12B128 HCS12B128 S12B128
	HCS12C MC9S12C S12C 9S12C Family		HCS12C Family
	MC9S12C32 HCS12C32 S12C32		MC9S12C32
	MC9S12C64 HCS12C64 S12C64		MC9S12C64
	MC9S12C96 HCS12C96 S12C96		MC9S12C96
	MC9S12C128 HCS12C128 S12C128		MC9S12C128
	HCS12D MC9S12D S12D 9S12D Family
	MC9S12D32 HCS12D32 S12D32
	MC9S12D64 HCS12D64 S12D64
	MC9S12DB128A HCS12DB128A S12DB128A
	MC9S12DB128B HCS12DB128B S12DB128B
	MC9S12DG128B HCS12DG128B S12DG128B
	MC9S12DG256B HCS12DG256B S12DG256B
	MC9S12DJ128B HCS12DJ128B S12DJ128B
	MC9S12DJ256B HCS12DJ256B S12DJ256B
	MC9S12DJ64 HCS12DJ64 S12DJ64
	MC9S12DP256B HCS12DP256B S12DP256B
	MC9S12DP512 HCS12DP512 S12DP512
	MC9S12DT128B HCS12DT128B S12DT128B
	MC9S12DT256 HCS12DT256 S12DT256
	MC9S12DT256B HCS12DT256B S12DT256B
	HCS12E MC9S12E S12E 9S12E Family
	MC9S12E32 HCS12E32 S12E32
	MC9S12E64 HCS12E64 S12E64
	MC9S12E128 HCS12E128 S12E128
	MC9S12E256 HCS12E256 S12E256
	HCS12G Family		HCS12G Family
	MC9-S12G48
	MC9-S12G64
	MC9-S12G96		MC9S12G96
	MC9-S12G128		MC9S12G128
	MC9-S12G192
	MC9-S12G240
	MC9-S12GA48
	MC9-S12GA64
	MC9-S12GA96
	MC9-S12GA128
	MC9-S12GA192
	MC9-S12GA240
	MC9-S12GN16		MC9S12GN16
	MC9-S12GN32		MC9S12GN32
	MC9-S12GN48
	MC9-S12GNA16
	MC9-S12GNA32
	HCS12GC Family		HCS12GC Family
	MC9-S12GC16		MC9S12GC16
	MC9-S12GC32		MC9S12GC32
	MC9-S12GC64		MC9S12GC64
	MC9-S12GC128		MC9S12GC128
	HCS12H Family
	MC9-S12H128
	MC9-S12H256
	MC9-S12HN64
	MC9-S12HZ64
	MC9-S12HZ128
	MC9-S12HZ256
	HCS12HA Family
	MC9-S12HA32
	MC9-S12HA48
	MC9-S12HA64
	HCS12HY Family
	MC9-S12HY32
	MC9-S12HY48
	MC9-S12HY64
	HCS12I Family
	MC9-S12I32
	MC9-S12I128
	HCS12K Family
	MC9-S12KC64
	MC9-S12KC128
	MC9-S12KG64
	MC9-S12KG128
	MC9-S12KG256
	MC9-S12KL64
	MC9-S12KL128
	MC9-S12KT128
	MC9-S12KT256
	HCS12N Family
	MC9-S12NE64
	HCS12P Family		HCS12P Family
	MC9-S12P32		MC9S12P32
	MC9-S12P64		MC9S12P64
	MC9-S12P96		MC9S12P96
	MC9-S12P128		MC9S12P128
	HCS12Q Family
	MC9-S12Q32
	MC9-S12Q64
	MC9-S12Q96
	MC9-S12Q128
	HCS12T Family
	MC9-S12T64
	HCS12U Family
	MC9-S12UF32
	HCS12VR Family		HCS12VR Family
	MC9-S12VR16		MC9S12VR16
	MC9-S12VR32		MC9S12VR32
	MC9-S12VR48		MC9S12VR48
	MC9-S12VR64		MC9S12VR64
	HCS12X		HCS12X
	HCS12XA Family
	MC9-S12XA256
	MC9-S12XA512
	HCS12XB Family
	MC9-S12XB128
	MC9-S12XB256
	HCS12XD Family
	MC9-S12XD64
	MC9-S12XD128
	MC9-S12XD256
	MC9-S12XDG128
	MC9-S12XDP512
	MC9-S12XDQ256
	MC9-S12XDT256
	MC9-S12XDT384
	MC9-S12XDT512
	HCS12XE Family		HCS12XE Family
	MC9-S12XEG128
	MC9-S12XEP100		MC9S12XEP100
	MC9-S12XEP768		MC9S12XEP768
	MC9-S12XEQ384		MC9S12XEQ384
	MC9-S12XEQ512		MC9S12XEQ512
	MC9-S12XET256		MC9S12XET256
	HCS12XF Family
	MC9-S12XF128
	MC9-S12XF256
	MC9-S12XF384
	MC9-S12XF512
	MC9-S12XFR128
	HCS12XHY Family
	MC9-S12XHY128
	MC9-S12XHY256
	HCS12XHZ Family
	MC9-S12XHZ256
	MC9-S12XHZ384
	MC9-S12XHZ512
	HCS12XS Family		HCS12XS Family
	MC9-S12XS64		MC9S12XS64
	MC9-S12XS128		MC9S12XS128
	MC9-S12XS256		MC9S12XS256
	MM912
	MM912x634
	MM912F634xx1xx
	MM912F634xx2xx
	MM912G634xx1xx
	MM912G634xx2xx
	MM912H634
	MM912x637
	MM912I637
	MM912J637

MD5 (cw-5.2-missing-peices-v3.zip) = 7a347a5b39a68da84e4a2870a4a6b55b

MD5 (PE-config-older-chips-v2.zip) = defbfba607f389a7191a63d8be513459

Re: Add missing derivatives to CodeWarrior HCS12(X) 5.2 (Unofficial Method)

abethestudent — Tue, 14 Feb 2017 03:07:44 GMT

Hey, Followed all the instruction but when I want to use the serial monitor for a connection for class but it is invisible with a few other options. Is there a method that allows them to show. thanks man.

Re: Add missing derivatives to CodeWarrior HCS12(X) 5.2 (Unofficial Method)

RodneyMcGee — Tue, 14 Feb 2017 14:18:09 GMT

The serial monitor is not supported with 5.2.

In this case, you have to use 5.1.

https://cache.nxp.com/lgfiles/devsuites/HC12/CW_HC12_v5.1_SPECIAL.exe

List of updates for 5.1 (not needed for 5.2!)

CodeWarrior for HCS12 v5.1 Compiler Update.exe

CodeWarrior for HCS12(X) Microcontrollers v5.1.exe

Processor Expert updates V3.05 for CodeWarrior for HCS12 v5.1.exe

CodeWarrior for HCS12 v5.1 G240 Service Pack.exe

CodeWarrior for HCS12 v5.1 G64 Service Pack.exe

CodeWarrior for HCS12 v5.1 GA128GN32 Service Pack.exe

CodeWarrior for HCS12 v5.1 MM912 x634 Service Pack.exe

CodeWarrior for HCS12 v5.1 MM912F634 Service Pack.exe

CodeWarrior for HCS12 v5.1 MM912H634 Service Pack.exe

CodeWarrior for HCS12 v5.1 MM912J637 Service Pack.exe

CodeWarrior for HCS12 v5.1 VR64 Service Pack.exe

CodeWarrior for MCU HCS12 VR32 Service Pack v5.1 (Final).exe

Re: How-to Add missing derivatives to CodeWarrior Classic HCS12(X) 5.2 (Unofficial Method)

maximederbois — Thu, 06 Apr 2017 10:05:11 GMT

This post saved me from hours of searching ! Thank you so much !

Re: How-to Add missing derivatives to CodeWarrior Classic HCS12(X) 5.2 (Unofficial Method)

dongranelec — Wed, 24 May 2017 09:49:52 GMT

Can you update the Processor Expert of CW5.2 for HCS12 ? I can't find MC9S12A128 (S12A series) in Processor Expert of CW5.2 . I have updated the CW5.2 for HCS12 as above method.

Re: How-to Add missing derivatives to CodeWarrior Classic HCS12(X) 5.2 (Unofficial Method)

RodneyMcGee — Thu, 08 Jun 2017 14:15:32 GMT

In my original post, I added a zip file called "PE config older chips.zip"

Extract this zip and replace these four files in your CW5.2/ProcessorExpert/Config folder overwriting the files.

Re: How-to Add missing derivatives to CodeWarrior Classic HCS12(X) 5.2 (Unofficial Method)

gerritbarrere — Wed, 02 Aug 2017 18:59:35 GMT

This is excellent, thank you very much! You have picked up where NXP has left us stranded. How do they expect users to maintain old devices?

I'm running Windows 10, CW 5.2 (I think? IDE says 5.9.0 but Installed Products says "development studio 5.2"), and I'm using a new P&E Multilink Universal BDM interface. I've followed the directions here and got everything going for my MC9S12DG256, ported my source files, built a new project, and can run the CW (HiWare) debugger. Mostly...

I get erratic results with the debugger. Sometimes unsecure and/or breakpoints work, sometimes not. Downloading code is almost always successful. The debugger HC12MultilinkCyclonePro / Select Derivative menu does not show the 9S12DG256, not even close, so I'm thinking I have the wrong 'derivative' selected here.

Does anyone know what I should select for this? There are three "unknown" derivative options: $2EA, $3D7, and $3D9, and I've tried them all. I can't find where these are defined anywhere, or what the 'derivative' number of my device really is.

Re: How-to Add missing derivatives to CodeWarrior Classic HCS12(X) 5.2 (Unofficial Method)

stealthserver — Sun, 21 Jan 2018 03:50:08 GMT

Thank you very much for this guide, but I did run into one issue.

The folders within the "cw-5.2-missing-peices-v1.zip" file are named "Bin", "Lib", and "Proj". While the Code Warrior 5.2 folders are "Bin", "lib", and "Prog". So if you just drag and drop the folders like you said they don't all go in the proper folder. I had to manually move the contents of each folder into their "proper" ones to get it to work properly.

Re: How-to Add missing derivatives to CodeWarrior Classic HCS12(X) 5.2 (Unofficial Method)

RodneyMcGee — Thu, 01 Feb 2018 14:36:08 GMT

Thanks I just fixed that.

Re: How-to Add missing derivatives to CodeWarrior Classic HCS12(X) 5.2 (Unofficial Method)

TurboBob — Thu, 01 Feb 2018 15:32:41 GMT

the link to the updates for 5.1 seems broken

5.1 seems to be working for my purposes, is there an advantage to wrestling with 5.2?

Re: How-to Add missing derivatives to CodeWarrior Classic HCS12(X) 5.2 (Unofficial Method)

RodneyMcGee — Fri, 02 Feb 2018 21:16:02 GMT

Thanks. I fixed the link to updates.

The differences between 5.1 and 5.2 are listed in the main post. The main advantage is it comes with all the updates, and they fixed a few things in ProcessorExpert. But if 5.1 is working ... no need to change.

Re: How-to Add missing derivatives to CodeWarrior Classic HCS12(X) 5.2 (Unofficial Method)

RodneyMcGee — Fri, 02 Feb 2018 21:38:25 GMT

I would try a USBDM from eBay. See if the results are any different.

Re: How-to Add missing derivatives to CodeWarrior Classic HCS12(X) 5.2 (Unofficial Method)

yikunliu — Thu, 15 Mar 2018 06:53:02 GMT

hello

i am come from China, i can't open youtube to watch your video.

can you tell me how to merge files to cw5.2 ?

thank you very much

Re: How-to Add missing derivatives to CodeWarrior Classic HCS12(X) 5.2 (Unofficial Method)

RodneyMcGee — Thu, 15 Mar 2018 14:28:50 GMT

The instructions are in the text of the main post.

Here is a picture that will help.

Re: How-to Add missing derivatives to CodeWarrior Classic HCS12(X) 5.2 (Unofficial Method)

yikunliu — Fri, 16 Mar 2018 12:40:30 GMT

it worked !!!!!

my mc9s12G64 appears in the list and Processor Expert useful

omg!!!!!

Forgive me for my bad English,

i don’t know how to express my thanks

it helps me a lot

Thank You!

Re: How-to Add missing derivatives to CodeWarrior Classic HCS12(X) 5.2 (Unofficial Method)

parvathipradeep — Thu, 12 Apr 2018 08:46:09 GMT

Hi Mr Rodney,

Thank you for the post. Just wanted to check if this version of Code Warrior 5.2 has any restriction of code size (32KB) or something ?

Regards,

Parvathi

Re: How-to Add missing derivatives to CodeWarrior Classic HCS12(X) 5.2 (Unofficial Method)

Eric_t — Thu, 26 Apr 2018 10:30:35 GMT

Hi!

About the attached file "PE-config-older-chips.zip".

Does any know what we have to do with it?

Thank you

Re: How-to Add missing derivatives to CodeWarrior Classic HCS12(X) 5.2 (Unofficial Method)

RodneyMcGee — Thu, 26 Apr 2018 13:20:14 GMT

Yes, by default you get the special edition unless you have a license.

Re: How-to Add missing derivatives to CodeWarrior Classic HCS12(X) 5.2 (Unofficial Method)

RodneyMcGee — Thu, 26 Apr 2018 13:21:53 GMT

See Part D of the instructions.

What you need to do this written there.

Re: How-to Add missing derivatives to CodeWarrior Classic HCS12(X) 5.2 (Unofficial Method)

Eric_t — Fri, 27 Apr 2018 10:26:42 GMT

Hi Rodney,

I didn't realize thatPE is for processor expert.

For some reason I thought that was for pemicro.

Thank you