topic Re: How to use CodeWarrior 5.2 for MC9S12XEG384 ? in Classic/Legacy CodeWarrior

How to use CodeWarrior 5.2 for MC9S12XEG384 ?

simhyeongjun — Wed, 24 Aug 2016 05:19:56 GMT

How can I create project for MC9S12XEG384 ?

I use CWS12v5.2 version.

This version didn't provide MC9S12XEG384 device.

Please recommend the solution.

Re: How to use CodeWarrior 5.2 for MC9S12XEG384 ?

TICS_Fiona — Thu, 25 Aug 2016 07:30:46 GMT

Hello Adam

Please refer to the link below to support missing derivatives in CW5.2:

https://community.nxp.com/thread/430483

Best Regards

Fiona Kuang

TIC - Technical Information Center

-----------------------------------------------------------------------------------------------------------------------

Note: If this post answers your question, please click the Mark Correct button. Thank you!

---------------------------------------------------------------------------------------------------------------------

Re: How to use CodeWarrior 5.2 for MC9S12XEG384 ?

simhyeongjun — Fri, 26 Aug 2016 02:39:38 GMT

Dear Fiona Kuang,

Thank you for reply.

I review your recommend link.

But I couldn't find MC9S12XEG384.

Best Regards,

ADAM Sim

Re: How to use CodeWarrior 5.2 for MC9S12XEG384 ?

TICS_Fiona — Thu, 01 Sep 2016 04:00:33 GMT

Hello Adam

You can select MC9S12XEQ384 for your development. MC9S12XEG384 has same memory map with MC9S12XEQ384 and almost the same peripheral module, only have fewer CAN interface.

For details, please refer to S12XE Family Data Sheet:

http://www.nxp.com/files/microcontrollers/doc/data_sheet/MC9S12XEP100RMV1.pdf

Hope this helps!

Best Regards
Fiona Kuang
TIC - Technical Information Center