Problem CW6.3SE in W7 & Ciclone Pro

pablobeccacece — Thu, 17 Mar 2016 12:17:19 GMT

Hello,

Recently CW6.3 install on W7 and install the driver for CYCLONE PRO PE. Everything was installed without inconvenience. The problem is when I want to debug from CW6.3 with CICLONE, this does not appear as an option Connection (via USB)

The driver is properly installed CICLONE (JUNGO LTD Ver. 12.2.0.0)

What can I do?

Re: Problem CW6.3SE in W7 & Ciclone Pro

trytohelp — Thu, 17 Mar 2016 13:07:19 GMT

Hi Pablo,

I see the following on my side:

P&E proposes several interfaces:

Cyclone PRO

Cyclone Universal

Cyclone Universal FX

USB Multilink Universal

USB Multilink Universal FX

CW for MCU v6.3 was released in 2010.

The Cyclone Universal, Cyclone Universal FX, USB Multilink Universal and USB Multilink Universal FX

were released after this date.

Please can you refer to the links:

- P&E Microcomputer Systems: Over 30 years as an Industry leader in Embedded Systems Development Tools, debug probes, and …

Have a great day,
Pascal
NXP Technical Support
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

topic Re: Problem CW6.3SE in W7 & Ciclone Pro in Classic/Legacy CodeWarrior

Problem CW6.3SE in W7 & Ciclone Pro

Re: Problem CW6.3SE in W7 & Ciclone Pro