topic Porting code to CW. in Classic/Legacy CodeWarrior

Porting code to CW.

Vianney — Thu, 17 May 2007 21:30:30 GMT

Hi,

I have the job to port a Cosmic code to a CW code. The microcontroller used is principally the HCS08GT32 but it can also works with other devices.
Like I never do that, i wondered if someone can give me some advices...
Thanks,

Vianney

Re: Porting code to CW.

CrasyCat — Fri, 18 May 2007 19:19:02 GMT

Hello

Go to the Freescale CodeWarrior for HC08 Web page

http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=CWS-H08-STDED-CX

Under Featured Document you found 8/16Bit Tech Note

After you extract the PDF from the zip file look at TN234.pdf.

If provides some advice on porting Cosmic code to CodeWarrior.

I hope that helps.

CrasyCat

Re: Porting code to CW.

Vianney — Wed, 23 May 2007 16:37:21 GMT

Yes, it helps me so much, thanks.

I am doing the job and I hope it will ending as it begins, i.e., in a good way.

Bye.