Classic/Legacy CodeWarriorのトピックRe: The linker option "–StackConsumption" does not work for HC12

The linker option "–StackConsumption" does not work for HC12

martinleben — Tue, 20 Jan 2015 14:28:11 GMT

Hi!

I develop for the HC12 processor family and want to know the maximum stack usage in my program. In the doc's I found the linker option "–StackConsumption". I enabled it and it requires a stanza in the PRM file, which I also added:

STACK_CONSUMPTION

ROOT main

END

However, when I try to build I get the following errors:

Error : Internal Error

Link Error : Link failed

What am I doing wrong?

Re: The linker option "–StackConsumption" does not work for HC12

Alice_Yang — Wed, 21 Jan 2015 01:07:19 GMT

Hi Martin,

Which IDE and version do you use ? CW10.6?

If yes, have you select here :

Hope it helps

Alice

Re: The linker option "–StackConsumption" does not work for HC12

martinleben — Wed, 21 Jan 2015 07:34:54 GMT

Thank you for your answer Alice, but I use 5.9.0 so your answer does not apply.

After all, this is the Classic/Legacy CodeWarrior area...! ;-)

Best regards,

Martin

Re: The linker option "–StackConsumption" does not work for HC12

Alice_Yang — Wed, 21 Jan 2015 12:18:46 GMT

HI Martin,

Please refer to "Build_Tools_Utilities.pdf" (...\CWS12v5.1\Help\PDF)

for "STACK_CONSUMPTION Block" (pg 89)

Hope it helps

Alice

Re: The linker option "–StackConsumption" does not work for HC12

martinleben — Wed, 21 Jan 2015 12:32:34 GMT

Oh, crap... "Build_Tools_Utilities.pdf" (...\CWS12v5.1\Help\PDF) page 89 says:

"NOTE Older versions of the compiler may not issue the information. Also, this feature is currently only supported for HC(S)08 derivatives."

Guess I am out of luck then...

Thank you Alice!

/Martin

Re: The linker option "–StackConsumption" does not work for HC12

trytohelp — Thu, 12 Feb 2015 16:36:50 GMT

Hi Martin,

I'm working on a question regarding the -STACK_CONSUMPTION.

The HC12 v5.1 is supporting this feature too.

However you must install the compiler update.

This file can be downloaded through the web side under your Freescale account

Have a great day,
Pascal
Freescale Technical Support
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------