Classic/Legacy CodeWarrior中的主题 Re: Regarding Profiling in MPC8313E RDB

Regarding Profiling in MPC8313E RDB

mathewsmphilip — Thu, 23 May 2013 13:40:56 GMT

Dear All,

I am using code warrior IDE version 5.9.0 (Evaluation version) for MPC 8313E RDB. When i used the example code for profiling (Freescale\CodeWarrior PA V8.8\(CodeWarrior_Examples)\PowerPC_EABI\SimpleProfiler),I am getting the profile time,average,maximum etc as Zeros.

Can you please give me the reasons for this.

These are the steps we followed

We linked the profiler library Profiler.Dwarf2.BE.UC.a .

DWARF settimg : DWARF 2.x

Byte Ordering : Big endian.

The readme says this example is customized for MPC8555 CDS board.

Whether we can use the same example for MPC8313E RDB??

Please help us in this regard as this info is very critical to our project.

Thanks in advance

Regards

Mathews

Re: Regarding Profiling in MPC8313E RDB

trytohelp — Fri, 24 May 2013 08:27:19 GMT

Hi Mathews,

I need to check it and probably need to contact colleagues.

Keep you informed.

Pascal

Re: Regarding Profiling in MPC8313E RDB

trytohelp — Fri, 24 May 2013 12:30:07 GMT

Hi Mathews,

Do you have contacted the Support team too ?

it seems you've already contacted the Support team via CRM system.

the problem has been logged under the 1-1065893211.

My colleague is investigating the problem and will provide you feedback via SR issue.

Regards

Pascal

Re: Regarding Profiling in MPC8313E RDB

mathewsmphilip — Mon, 27 May 2013 03:09:41 GMT

Dear Pascal,

I had put the same in the community as a question, Since i didnt get any answer,i put a service request.

Please respond as this already affected my relaese.

Hoping for a fast reply.

Regards

Mathews

Re: Regarding Profiling in MPC8313E RDB

trytohelp — Mon, 27 May 2013 06:56:37 GMT

Hi Mathews,

Following the info I found under the SR, my colleague is working on your problem.

He sent you an email early this morning.

Regards

Pascal

Re: Regarding Profiling in MPC8313E RDB

mathewsmphilip — Mon, 27 May 2013 07:24:09 GMT

Dear Pascal,

Got the message this morning.

waiting for the answer from the factory.

Thanks a lot for the support

Regards

Mathews