Classic/Legacy CodeWarriorのトピックRe: how to use code warrior for programming a mc68hc908bd48

how to use code warrior for programming a mc68hc908bd48

quimey — Fri, 28 Mar 2008 17:33:19 GMT

hola i´m new in the subjet.i need knowledge as using code warrior 6 for burn the program to the mc68hc908bd48, and if somebody knows how is the connections using the serie port or the usb port.
please hel me.bye

Re: how to use code warrior for programming a mc68hc908bd48

J2MEJediMaster — Fri, 28 Mar 2008 21:00:33 GMT

It's not clear to me what you're trying to do. You want to burn the program into Flash, but what is your debugger connection to the hardware? Are you trying to develop code, or just take an existing S-record file and load it into Flash?

---Tom

ns a MPC8560 Re: how to use code warrior for programming a mc68hc908bd48

Vhugo9 — Tue, 04 May 2010 23:35:36 GMT

Hi, any help, i am using code warriors and MPC8560, I just want to take an existing srec file into flash? how to do it... sorry i am new on this matter..

Re: ns a MPC8560 Re: how to use code warrior for programming a mc68hc908bd48

J2MEJediMaster — Wed, 05 May 2010 19:20:01 GMT

You should start a new thread when asking a question that uses a different processor.

Having said that, let me now try to answer your question. I am looking at the the CodeWarrior for Power Architecture 8.8 documentation. In the IDE User's Guide (CodeWarrior IDE 5.7 Windows's User Guide.pdf), Chapter 22, there is information on the flash programmer window. As its name suggests, you use this window to program the flash. On page 268, which describes the Prgram Verify panel, there is an option, File Type. This option lets you select the type of file you use as the data source for the programming operation. One of the supported choices is S-record. Consult the manual for more detail on how to set up this window for programming operations.

---Tom