topic Re: CodeWarrior for 68K debug interface in Classic/Legacy CodeWarrior

CodeWarrior for 68K debug interface

stefanorocca — Fri, 07 Nov 2008 18:25:45 GMT

Hello,

I'm using CodeWarrior for 68K/Codlfire Embedded System IDE version 4.2.7.593 (seems to be the last, purchased one week ago).

My target is a MC68332 processor.

I purchased a P&E UB CPU16/32 MULTILINK (usb bdm interface) in order to debug, but the IDE doesn't support it.
Is there any update/patch for doing that?

If not, may you suggest me some interfaces that really work with you IDE?

Thank you in advance.

Stefano

Re: CodeWarrior for 68K debug interface

CrasyCat — Mon, 10 Nov 2008 20:52:44 GMT

Hello

CodeWarrior for 68K supports parallel cable from P&E only.

So what you need is a CABLE_16/32 or a CABLE_16/32LV from P&E.

CrasyCat

Re: CodeWarrior for 68K debug interface

stefanorocca — Mon, 10 Nov 2008 21:38:06 GMT

Thanks CrasyCat,

I got the parallel interface.

It seems to work only on the PCs equipped with a parallel port on the main board.

With the others (all the actual PCs, w/o parallel port on the main-board, but added as a PCI add-on), it doesn't work.

Is it right?

Stefano

Re: CodeWarrior for 68K debug interface

CrasyCat — Tue, 11 Nov 2008 18:40:16 GMT

Hello

I am not sure this can work.

I would suggest you to contact P&E and ask them whether they have a solution for that.

They have a forum as well at following URL:

http://www.pemicro.com/support/forums_index.cfm

CrasyCat