topic progamming power pc mpc5200b in Classic/Legacy CodeWarrior

progamming power pc mpc5200b

j_tag — Wed, 13 Apr 2011 02:20:53 GMT

hello,

i want to start learning progamming. i have some board with the power pc mpc5200b with external flash memory.

i have one code warrior usb tap. but i dont have the software and usb drivers to progamming the mpc5200b core.

wich software do i need?

best regards

Re: progamming power pc mpc5200b

J2MEJediMaster — Wed, 13 Apr 2011 20:15:03 GMT

You will want to download CodeWarror for mobileGT, which supports the processor type. Information about these tools and a download link can be found on this web page.

---Tom

Re: progamming power pc mpc5200b

j_tag — Tue, 19 Apr 2011 03:51:58 GMT

hello,

thanx tom for the download link! after i downlaod the the software i cant connect to my core.

target core:mpc5200b habanero connect to code warrior usb tap.

i download the datsheet from the mpc5200b. and use the follow pins: use 16 pin j-tag cop connector)

BO4 j-tag tck

A02 j-tag tdo

AO3 j-tag tdi

A04 j-tag tms

A14 sreset

B13 hreset

my target dont support B03 j-tag trst. and i dont have CKSO,QACK on the board

when i go to:hardware diagnostic and i try to connect to the core( test begin scoop loop) i dont see the run/pause led working. all the time the rx/tx led is working and stay green.

i hope i provide all the information to get some help.

bet regards.