topic Re: Getting reset problem while connecting MSBA8100ADS in Classic/Legacy CodeWarrior https://community.nxp.com/t5/Classic-Legacy-CodeWarrior/Getting-reset-problem-while-connecting-MSBA8100ADS/m-p/196241#M5121 <HTML><HEAD></HEAD><BODY><DIV></DIV>Check the <I>User's Guide</I> document that normally comes with the board. It should tell you what jumpers need to be set, and which connectors to use.<BR /><BR />---Tom<BR /><DIV></DIV></BODY></HTML> Wed, 22 Oct 2008 20:54:43 GMT J2MEJediMaster 2008-10-22T20:54:43Z Getting reset problem while connecting MSBA8100ADS https://community.nxp.com/t5/Classic-Legacy-CodeWarrior/Getting-reset-problem-while-connecting-MSBA8100ADS/m-p/196240#M5120 <HTML><HEAD></HEAD><BODY><SPAN>Hi,</SPAN><BR /><BR /><SPAN>I am working on MSBA8100ADS. While running stationary project provided in code warrior version 3.2, I am getting reset target fail message. This board is having two jtag connector p1 and p2. I am confused where should I connect usb tap while running this stationary project and what should be code warrior setting in this case.</SPAN><BR /><SPAN>If some one having any idea then please do the needful asap.</SPAN><BR /><BR /><BR /><BR /><SPAN>Thanks</SPAN><BR /><SPAN>Purushottam</SPAN></BODY></HTML> Wed, 22 Oct 2008 18:34:18 GMT https://community.nxp.com/t5/Classic-Legacy-CodeWarrior/Getting-reset-problem-while-connecting-MSBA8100ADS/m-p/196240#M5120 puru 2008-10-22T18:34:18Z Re: Getting reset problem while connecting MSBA8100ADS https://community.nxp.com/t5/Classic-Legacy-CodeWarrior/Getting-reset-problem-while-connecting-MSBA8100ADS/m-p/196241#M5121 <HTML><HEAD></HEAD><BODY><DIV></DIV>Check the <I>User's Guide</I> document that normally comes with the board. It should tell you what jumpers need to be set, and which connectors to use.<BR /><BR />---Tom<BR /><DIV></DIV></BODY></HTML> Wed, 22 Oct 2008 20:54:43 GMT https://community.nxp.com/t5/Classic-Legacy-CodeWarrior/Getting-reset-problem-while-connecting-MSBA8100ADS/m-p/196241#M5121 J2MEJediMaster 2008-10-22T20:54:43Z