Classic/Legacy CodeWarriorのトピックRe: Unable to invoke FORCEFILES directive in CodeWarrior 6.3 for M5485EVB

Unable to invoke FORCEFILES directive in CodeWarrior 6.3 for M5485EVB

Sailesh — Sun, 12 Oct 2008 14:12:38 GMT

Hello ,

I'm using CodeWarrior V 6.3 and Coldfire M5485EVB.

I'm developing a small application which consists of a boot loader and a library (lib1.c,lib2.c). The boot loader will eventually load another application which invokes functions in my library.

Since the functions in my library are not invoked by my boot loader, linker does not include lib1.c and lib2.c in my final buillt i.e elf.s19 (dead stripping).I used the linker directive FORCEFILES { lib1.o lib2.o} ,at the end of my lcf file but it didn't work.

Do i have to use any other directives?

After every make command i check the elf [.xmap file] to see what all files are included in my final built

Sailesh

Re: Unable to invoke FORCEFILES directive in CodeWarrior 6.3 for M5485EVB

CrasyCat — Mon, 13 Oct 2008 15:31:49 GMT

Hello

Are you building from the IDE or are you using command line tools?

CrasyCat

Re: Unable to invoke FORCEFILES directive in CodeWarrior 6.3 for M5485EVB

Sailesh — Mon, 13 Oct 2008 17:55:07 GMT

I'm using the IDE

Re: Unable to invoke FORCEFILES directive in CodeWarrior 6.3 for M5485EVB

CrasyCat — Mon, 13 Oct 2008 18:45:06 GMT

Hello

Can you add the following pragma at the beginning of the file file1.c and file.c:

#pragma force_active on

That should do it

CrasyCat

Re: Unable to invoke FORCEFILES directive in CodeWarrior 6.3 for M5485EVB

Sailesh — Fri, 17 Oct 2008 07:43:50 GMT

No it's still not working for me..
I have attached my project folder,there are couple of Files like queue.c and tasks.c which are still not included in my final elf.

test1.zip

Message Edited by t.dowe on 2009-09-04 11:07 AM

Re: Unable to invoke FORCEFILES directive in CodeWarrior 6.3 for M5485EVB

CrasyCat — Fri, 17 Oct 2008 18:31:27 GMT

Hello

I do not have V6.3 installed on my system, so I did some quick tests with V6.4

I am currently unable to link the application.

I get message that pvPortMalloc, ulPortSetIPL, and so on are undefined.

I assume I am missing some library or source files...

CrasyCat

Re: Unable to invoke FORCEFILES directive in CodeWarrior 6.3 for M5485EVB

Sailesh — Tue, 21 Oct 2008 10:58:17 GMT

I tried using #pragma export on and it worked.

There is one small doubt, i tried to run my project in CodeWarrior V7.1 and it's giving me a compile time error
"undefined symbol vuint32", whereas the project runs perfectly fine in CodeWarrior 5.7 version.

Can u explain this erratic behavior

Re: Unable to invoke FORCEFILES directive in CodeWarrior 6.3 for M5485EVB

CrasyCat — Tue, 21 Oct 2008 20:58:39 GMT

Hello

I would recommend you to submit a service request for that.

Click here to submit a service request.

Make sure to attach a reproducible project and installed product information to the service request.
To generate the required information:
- Start CodeWarrior
- Open the project
- Select "Help" -> "Pack and Go" and follow instructions on the screen.

Attach the generated .zip file to the SR.

I assume the type vuint32 was defined somewhere in your V6.3 installation and not in V7.1.

Anyway it is better to let the support team get a look at that.

CrasyCat