topic Re: Codewarrior 10.1 problem by installing new software.. in Classic/Legacy CodeWarrior

Codewarrior 10.1 problem by installing new software..

monXii — Mon, 19 Dec 2011 22:43:17 GMT

Hello,

i installed the Codewarior 10.1 on my Windows 7 64 Bit System.

No problem .. But then i installed all the new Software from this URL (http://freescale.com/lgfiles/updates/Eclipse/MCU10_1/com.freescale.mcu.updatesite/) via Eclipse > Help > Install new software ..

And after a while this error occures =/

An error occurred while installing the items
session context wasprofile=PlatformProfile, phase=org.eclipse.equinox.internal.provisional.p2.engine.phases.Install, operand=null --> [R]com.freescale.mcu10_1.beekit.win.sp_root 1.0.1, action=org.eclipse.equinox.internal.p2.touchpoint.natives.actions.RemoveAction).
Directory is not empty: C:\Program Files (x86)\Freescale\CW MCU v10.1\eclipse\..\MCU\ARM_EABI_Support\Memory_Config_Files
Directory is not empty: C:\Program Files (x86)\Freescale\CW MCU v10.1\eclipse\..\MCU\ARM_EABI_Support\Memory_Config_Files

when i remove this folder, it has some error by another folder ..

what's the problem? whats wrong? where is my fault?

i need the updates cause i want to use MQX 3.7 on K60 ..

Re: Codewarrior 10.1 problem by installing new software..

monXii — Tue, 20 Dec 2011 18:43:03 GMT

Hello again..

i installed CW10.1 on my Win Xp 32 Bit Notebook..

All is fine!

Someone else problems with Win 7 64 Bit?

Or is there someone who runs CW10.1 with all updates on Win 7 64 Bit? =)

Re: Codewarrior 10.1 problem by installing new software..

edwardjpalmer — Sat, 14 Jan 2012 07:27:20 GMT

I get the same error. Tried everything short of uninstalling the entire CodeWarrior suite and starting fresh. I am also running Win7 64-bit.

All software updates worked except for two:

CodeWarrior Core IDE, v1.0.1

CW MCU v10.1 Update, v1.0.1

I then ran the CodeWarrior executable in Windows XP SP3 compatibility mode. All the updates appeared to work just fine!

Re: Codewarrior 10.1 problem by installing new software..

CrasyCat — Mon, 16 Jan 2012 15:18:12 GMT

Hello

Did you try installing CodeWarrior outside of the C:\Program Files (x86) directory?

Try using C:\Freescale as root installation directory instead of C:\Program Files (x86)\Freescale.

Also make sure you are logged in with Administrator right to do the install.

CrasyCat

Re: Codewarrior 10.1 problem by installing new software..

sps — Wed, 18 Jan 2012 01:02:27 GMT

I have the same error during CW10.1 update installs. Without the updates, not possible to build the MQX libs. I don't want to change paths all over the place since this complicates moving projects across platforms.

Any solutions yet, other than installing from root (not a great solution) - not looking forward to one more uninstall/reinstall dance with CW & MQX.

System: Dell Optiplex I7, Win7 Pro x64.

Thanks - Steve

Re: Codewarrior 10.1 problem by installing new software..

CrasyCat — Thu, 19 Jan 2012 16:03:35 GMT

Hello

There is an Update Procedure document that explains how to install the Compiler Update (http://www.freescale.com/files/soft_dev_tools/doc/support_info/CW_MCU_v10.1_Update_Procedure.pdf) in offline or online mode.

Try using off-line mode.

CrasyCat