topic CW & async baud set in Classic/Legacy CodeWarrior

CW & async baud set

bob_s — Tue, 30 Sep 2008 23:42:54 GMT

I've configured an async serial port with a CW bean. I selected the baud rates I want to be able to select, but the bean does not enable the routine to change the baud rate. Please see the attachment pics. Thanks.

Re: CW & async baud set

trytohelp — Wed, 08 Oct 2008 21:42:14 GMT

Hi,

To investigate the problem, it will be better to log it directly in the Technical support system.
Please use Freescale on line support web page.
- Go to following URL: http://www.freescale.com/TechSupport
- Click on Submit a Service Request. You will come to a login page.
- You can submit your request through the web from there.

Please provide us more details about the Tool version used.
To do that you must:
* CW:
Start the IDE and click on Help | About Metrowerks CodeWarrior.
Click on Installed Products
Provide us all info displayed.
Or you can save them in a txt file.

Can you please provide us your example reproducing the issue ?

Pascal

Re: CW & async baud set

bob_s — Thu, 09 Oct 2008 00:15:18 GMT

Hi Pascal;

Thanks for the response. What I found was that the routine was enabled, it was just grayed out because it wasn't a routine that could be optionally excluded. I thought that because it was grayed out, it couldn't be used. No problem exists at this point. :smileyhappy: