Boot load settings in cmd file - problem with xBootCfg

EliArad — Tue, 06 Dec 2011 21:11:17 GMT

in the document Serial Bootloader for 56F82xx

it says to add the following in the cmd file of the application firmware side.

.xBootCfg(RWX)RIGIN = 0x00007BFE,LENGTH = 0x2

.ApplicationConfiguration :
{
# Store the application entry point
WRITEH(F_EntryPoint);

# Bootload start delay in seconds
WRITEH(10);

} > .xBootCfg

When i add this and trying to compile i am getting an error:

linker error on this line:

.xBootCfg(RWX)RIGIN = 0x00007BFE,LENGTH = 0x2

Can you please tell me what should I do?

Thanks,

Eli

Re: Boot load settings in cmd file - problem with xBootCfg

EliArad — Tue, 13 Dec 2011 20:41:21 GMT

Can any one from freescale can send me please a copy example of

smm_pROM_xRAM.cmd that works with bootloader?

I did all it says in the document and it failed to link

like in the previuos message.

please send to easp13

gmail.

com

Thanks,

Eli

topic Boot load settings in cmd file - problem with xBootCfg in Classic/Legacy CodeWarrior

Boot load settings in cmd file - problem with xBootCfg

Re: Boot load settings in cmd file - problem with xBootCfg