Classic/Legacy CodeWarriorのトピックRe: maximum stack consumption

maximum stack consumption

Richly — Thu, 24 Feb 2011 23:45:36 GMT

According to section 1.3.2 of the release notes for CW10.1, "Linker computes maximum stack consumption for applications." Where can I find the results of this calculation?

Thanks,

Richly

Re: maximum stack consumption

CrasyCat — Fri, 25 Feb 2011 15:21:22 GMT

Hello

Please check the document {Install}\help\PDF\Build_Tools_Utilities.pdf.

You should see a section named "Stack Consumption Computation" in there.

CrasyCat

Re: maximum stack consumption

Richly — Fri, 25 Feb 2011 15:30:36 GMT

Thanks. I hadn't located that directory. Lots of useful information there that hasn't made it into the Help search facility.

- Richly

Re: maximum stack consumption

CrasyCat — Fri, 25 Feb 2011 15:45:30 GMT

Hello

This is strange. I did a quick test here.

I opened the Search view and entered Stack Consumption Computation in the Search Expression edit box.

It provided me a pointer to the corresponding location in the Build Tool manual (See attached image)

CrasyCat

Re: maximum stack consumption

Richly — Sun, 27 Feb 2011 12:27:26 GMT

Yep...ask the right question, and you'll get a useful selection of possible answers. Ask the wrong question, and the answer shows up so far down the list, you'll not find it. I asked the wrong question...though I don't recall exactly what I entered. Probably something like 'maximum stack size' or maybe just 'stack'. Whatever it was, I couldn't find what I needed, so your response was most helpful. Again, thanks!