topic Re: just run with single step in Classic/Legacy CodeWarrior https://community.nxp.com/t5/Classic-Legacy-CodeWarrior/just-run-with-single-step/m-p/177362#M3883 <HTML><HEAD></HEAD><BODY><P>Kef, I'm sorry for replying you so late. It's all because of errors in codes. I've solved the problem. Thank you very much.</P><P>&nbsp;</P><P>ustcsnaker</P></BODY></HTML> Mon, 21 Nov 2011 08:33:43 GMT ustcsnaker 2011-11-21T08:33:43Z just run with single step https://community.nxp.com/t5/Classic-Legacy-CodeWarrior/just-run-with-single-step/m-p/177360#M3881 <HTML><HEAD></HEAD><BODY><P>Hi,everyone!</P><P>I'm using the MC9S12XEP100.</P><P>When I debug the codes, &nbsp;some parts can only be dedugged with single steps. And I set some breakpoints. The codes don't run to the breakpoint. I want the reason!&nbsp;</P><P>Thanks for your help!</P></BODY></HTML> Thu, 27 Oct 2011 13:03:47 GMT https://community.nxp.com/t5/Classic-Legacy-CodeWarrior/just-run-with-single-step/m-p/177360#M3881 ustcsnaker 2011-10-27T13:03:47Z Re: just run with single step https://community.nxp.com/t5/Classic-Legacy-CodeWarrior/just-run-with-single-step/m-p/177361#M3882 <HTML><HEAD></HEAD><BODY><P>Make sure you have checked in debugger</P><P>HC12MultilinkCyclonePro-&gt;Setup...-&gt;Debug options-&gt;Disable maskable ISR's when stepping.</P><P>&nbsp;</P><P>&nbsp;</P></BODY></HTML> Thu, 27 Oct 2011 14:51:46 GMT https://community.nxp.com/t5/Classic-Legacy-CodeWarrior/just-run-with-single-step/m-p/177361#M3882 kef 2011-10-27T14:51:46Z Re: just run with single step https://community.nxp.com/t5/Classic-Legacy-CodeWarrior/just-run-with-single-step/m-p/177362#M3883 <HTML><HEAD></HEAD><BODY><P>Kef, I'm sorry for replying you so late. It's all because of errors in codes. I've solved the problem. Thank you very much.</P><P>&nbsp;</P><P>ustcsnaker</P></BODY></HTML> Mon, 21 Nov 2011 08:33:43 GMT https://community.nxp.com/t5/Classic-Legacy-CodeWarrior/just-run-with-single-step/m-p/177362#M3883 ustcsnaker 2011-11-21T08:33:43Z