topic Re: configure I/O in Classic/Legacy CodeWarrior

configure I/O

dspfusm — Fri, 30 Mar 2007 03:14:41 GMT

HI!!!!

I need to konw how i configure a pin to GPIO to in or out.

thanks

Message Edited by Alban on 2007-03-30 12:36 PM

peg — Fri, 30 Mar 2007 05:16:38 GMT

Hi,

Seeing how we are talking about the general case here, the answer is:

By setting or clearing the appropriate bit in the appropriate direction control register.

Alban — Fri, 30 Mar 2007 18:35:32 GMT

Hello,

Your subject does not match requirements and you don't give any details.

This is not possible to help you when you give nothing.

Please read the rules if you don't want your messages to be deleted.

Regards,

Alban.

Message Edited by Alban on 2007-03-30 12:36 PM

Alban — Fri, 30 Mar 2007 18:37:36 GMT

Hi David,

If you had not answer this post, I would have deleted it.

Alban.

peg — Fri, 30 Mar 2007 19:32:20 GMT

It was only meant as a satirically useless answer to point out the useless nature of the question.