Classic/Legacy CodeWarriorのトピックRe: How to make the UART Intteruptdriven using the function InterruptInitializeIntDrivenUART? https://community.nxp.com/t5/Classic-Legacy-CodeWarrior/How-to-make-the-UART-Intteruptdriven-using-the-function/m-p/174487#M3647 <HTML><HEAD></HEAD><BODY>Anyone?<BR /><BR />In CodeWarrior TRK Reference is says: "For any target board for which CodeWarrior TRK uses interrupt-driven communication,<BR />set the value of TRK_TRANSPORT_INT_DRIVEN to 1." In What file shall we define this?<BR /><BR />Tnx for support<BR /><BR />//skoglund<BR /><DIV></DIV></BODY></HTML> Mon, 28 Jul 2008 14:07:53 GMT skoglund 2008-07-28T14:07:53Z How to make the UART Intteruptdriven using the function InterruptInitializeIntDrivenUART? https://community.nxp.com/t5/Classic-Legacy-CodeWarrior/How-to-make-the-UART-Intteruptdriven-using-the-function/m-p/174486#M3646 <HTML><HEAD></HEAD><BODY><SPAN>We are using C.W 8.7 and&nbsp; MPC8360EA_MDS_PB Rev 2.1</SPAN><BR /><BR /><SPAN>We have been able to establish an duplex communication over UART1 using the functions InitializeUART(), ReadUARTN() and WriteUARTN() as mention in the "CodeWarrior TRK Reference".</SPAN><BR /><BR /><SPAN>Our aim is to make the communication Interruptdriven on the UART </SPAN><STRONG>input</STRONG><SPAN> and haven't been able to understand how:</SPAN><BR /><SPAN>*InterruptInitializeIntDrivenUART</SPAN><BR /><SPAN>*InterruptHandler()</SPAN><BR /><SPAN>*TransportIrqHandler()</SPAN><BR /><BR /><SPAN>works together and how the "volatile unsigned char** inputPendingPtrRef) in InterruptInitializeIntDrivenUART is to be used.</SPAN><BR /><BR /><SPAN>Could anyone provide me with an example of how to make an input UART interruptdriven?</SPAN><BR /><BR /><SPAN>Best Regards</SPAN><BR /><BR /><SPAN>Andreas</SPAN><BR /><DIV> </DIV></BODY></HTML> Mon, 21 Jul 2008 15:20:27 GMT https://community.nxp.com/t5/Classic-Legacy-CodeWarrior/How-to-make-the-UART-Intteruptdriven-using-the-function/m-p/174486#M3646 skoglund 2008-07-21T15:20:27Z Re: How to make the UART Intteruptdriven using the function InterruptInitializeIntDrivenUART? https://community.nxp.com/t5/Classic-Legacy-CodeWarrior/How-to-make-the-UART-Intteruptdriven-using-the-function/m-p/174487#M3647 <HTML><HEAD></HEAD><BODY>Anyone?<BR /><BR />In CodeWarrior TRK Reference is says: "For any target board for which CodeWarrior TRK uses interrupt-driven communication,<BR />set the value of TRK_TRANSPORT_INT_DRIVEN to 1." In What file shall we define this?<BR /><BR />Tnx for support<BR /><BR />//skoglund<BR /><DIV></DIV></BODY></HTML> Mon, 28 Jul 2008 14:07:53 GMT https://community.nxp.com/t5/Classic-Legacy-CodeWarrior/How-to-make-the-UART-Intteruptdriven-using-the-function/m-p/174487#M3647 skoglund 2008-07-28T14:07:53Z