topic Re: Program Flash above 0x20000 on 56F8366 in Classic/Legacy CodeWarrior

Program Flash above 0x20000 on 56F8366

tim_robbins — Fri, 14 Dec 2007 22:13:32 GMT

I am using a 56F8366. My code size has recently jumped above 0x20000, which is about half way thru the total program space. Its also a transistion point from the first 256k space to the other 256k space.

Everytime my software tries to execute an instruction in the code space about 0x20000 I get a illegal op code interrupt. After further review, it appears that its writing all zeros to anything above 0x20000 instead of my code.

Any one have any ideas? I am using CW 8.1.1a

Thanks,

Tim

Re: Program Flash above 0x20000 on 56F8366

trytohelp — Sat, 15 Dec 2007 01:05:53 GMT

Hi,

I'm not sure but it could be similar to another problem we investigated 2month ago for another chip.

Can I suggest you to log this issue in the Freescale CRM system ?

Please use Freescale on line support web page.
- Go to following URL: http://www.freescale.com/TechSupport
- Click on Submit a Service Request. You will come to a login page.
- You can submit your request through the web from there.

Can you please add the following info :

- do you use Processor Expert ?

- do you meet the problem in simulator too?

Pascal

Re: Program Flash above 0x20000 on 56F8366

Mika — Tue, 29 Jul 2008 20:07:50 GMT

Hello!

What was the solution? I am having very similar problems with 56F8345 and CW 8.0. Problems start immediately after program flash size reaches 50%. First I had problems with function pointer array initializations and now I have new weird problem that I haven't been able to kill yet. And I am not using PE.

- MiT