Open/New file dialog err

VrAlex — Fri, 14 Dec 2007 17:53:05 GMT

Hello,

I'm experiencing something very strange when I try to Open or create a New Project in CW 6.1. The IDE will crash/dump when trying to access (read/write) one of the following files: IDE_MFC60cw.dll or IDENewDialog.dll. This will not happen when I open the environment directly by accessing a *. mcp file.(or any existing file in a format supported by the IDE).

I'm 100% sure that the problem is caused by dll read/write privileges but I wasn't able to solve it. I mention that I have full permission over these files but I still get this IDE crush.

In order to get a full understanding of my problem I attached the .dump file generated by the IDE.

If you have any suggestions on how can I solve this, please respond as I have run out of ideas.

Thanks.

P.S: I saved the .dump file as a normal txt in order to be able to attach it.

Re: Open/New file dialog err

CrasyCat — Fri, 14 Dec 2007 18:18:43 GMT

Hello

There is a known incompatibility between CodeWarrior and Office Groove.

Please have a look for FAQ-27815 or FAQ-27460 for possible solutions to fix the issue.

CrasyCat

topic Re: Open/New file dialog err in Classic/Legacy CodeWarrior

Open/New file dialog err

Re: Open/New file dialog err