Receive Data by Serial Communication

Fred37b — Sat, 30 Jan 2010 01:00:33 GMT

Hi,

I would receive a caracters string in interrupt with my DSP56F807.

I'll arrive to receive one caracter with the function "mySerialComponent_RecvChar()" it works but i cannot use the function "mySerialComponent_RecvBlock()".

I can see my system gone in interrupt with the debugger or LED on board but i don't arrive to receive a caracter string.

I can send a caracter or a caracter string but for this one I don't use the function "mySerialComponent_SendChar()".

I use codewarrior.

Re: Receive Data by Serial Communication

Fred37b — Mon, 01 Feb 2010 23:44:48 GMT

I was mistaken, I use the function SendChar but for receiving data I want to use the RecvBlock function during an inerrupt.

My buffer size is minimum, I write my receive code in the OnFullRxBuff method,I can see my DSP gone in this method but I don't know how I'm supposed to take the sended data.

Classic/Legacy CodeWarriorのトピックReceive Data by Serial Communication

Receive Data by Serial Communication

Re: Receive Data by Serial Communication