Classic/Legacy CodeWarriorのトピックRe: Codewarrior 5.0 vs 4.7 https://community.nxp.com/t5/Classic-Legacy-CodeWarrior/Codewarrior-5-0-vs-4-7/m-p/169198#M3276 <HTML><HEAD></HEAD><BODY>Yes I check it. It´s ok.</BODY></HTML> Mon, 27 Apr 2009 20:16:44 GMT Seitec 2009-04-27T20:16:44Z Codewarrior 5.0 vs 4.7 https://community.nxp.com/t5/Classic-Legacy-CodeWarrior/Codewarrior-5-0-vs-4-7/m-p/169196#M3274 <HTML><HEAD></HEAD><BODY><P>Hello,</P><P>I am install new Codewarrior 5.0 and creat new project. I&nbsp;wrote program and start simulation .(Full Chip Simulation) But simulation didn´t react on output compare&nbsp;interrupt. Same code in new project in Codewarrior 4.7 is OK.</P><P>&nbsp;</P><P>Do anybody please where could be mistake?</P><P>Thank you very much.</P></BODY></HTML> Fri, 03 Apr 2009 02:47:50 GMT https://community.nxp.com/t5/Classic-Legacy-CodeWarrior/Codewarrior-5-0-vs-4-7/m-p/169196#M3274 Seitec 2009-04-03T02:47:50Z Re: Codewarrior 5.0 vs 4.7 https://community.nxp.com/t5/Classic-Legacy-CodeWarrior/Codewarrior-5-0-vs-4-7/m-p/169197#M3275 <HTML><HEAD></HEAD><BODY><P>Hi Seitec,</P><P>&nbsp;</P><P>could you check if the debugger selected derivative match with the MCU you wrote the program to?</P><P>&nbsp;</P><P>Stanish</P></BODY></HTML> Fri, 03 Apr 2009 19:03:16 GMT https://community.nxp.com/t5/Classic-Legacy-CodeWarrior/Codewarrior-5-0-vs-4-7/m-p/169197#M3275 stanish 2009-04-03T19:03:16Z Re: Codewarrior 5.0 vs 4.7 https://community.nxp.com/t5/Classic-Legacy-CodeWarrior/Codewarrior-5-0-vs-4-7/m-p/169198#M3276 <HTML><HEAD></HEAD><BODY>Yes I check it. It´s ok.</BODY></HTML> Mon, 27 Apr 2009 20:16:44 GMT https://community.nxp.com/t5/Classic-Legacy-CodeWarrior/Codewarrior-5-0-vs-4-7/m-p/169198#M3276 Seitec 2009-04-27T20:16:44Z