topic Re: MC56F82 beans or PE in Classic/Legacy CodeWarrior https://community.nxp.com/t5/Classic-Legacy-CodeWarrior/MC56F82-beans-or-PE/m-p/167791#M3134 <HTML><HEAD></HEAD><BODY><P>You might want to go to our <A href="http://forums.freescale.com/t5/Processor-Expert-Software/ct-p/PROCEXPT" target="_self">Processor Expert forum</A> and ask the questios there.</P><P>&nbsp;</P><P>---Tom</P></BODY></HTML> Thu, 31 May 2012 19:14:29 GMT J2MEJediMaster 2012-05-31T19:14:29Z MC56F82 beans or PE https://community.nxp.com/t5/Classic-Legacy-CodeWarrior/MC56F82-beans-or-PE/m-p/167790#M3133 <HTML><HEAD></HEAD><BODY><P>I have done one MQX project based on the examples included with MQX. I have been asked to add a SPI interface to a MC56F825X project. Doing a quick look around the forums I found more references to using PE beans then examples. Not havening used PE or the MC56F825X before I am looking for suggestions. Should I start with PE and if I do where do I find PE documentation? I am using CW 10.2 but have no experience with PE</P><P>Thanks</P></BODY></HTML> Thu, 31 May 2012 02:32:29 GMT https://community.nxp.com/t5/Classic-Legacy-CodeWarrior/MC56F82-beans-or-PE/m-p/167790#M3133 barbercolman 2012-05-31T02:32:29Z Re: MC56F82 beans or PE https://community.nxp.com/t5/Classic-Legacy-CodeWarrior/MC56F82-beans-or-PE/m-p/167791#M3134 <HTML><HEAD></HEAD><BODY><P>You might want to go to our <A href="http://forums.freescale.com/t5/Processor-Expert-Software/ct-p/PROCEXPT" target="_self">Processor Expert forum</A> and ask the questios there.</P><P>&nbsp;</P><P>---Tom</P></BODY></HTML> Thu, 31 May 2012 19:14:29 GMT https://community.nxp.com/t5/Classic-Legacy-CodeWarrior/MC56F82-beans-or-PE/m-p/167791#M3134 J2MEJediMaster 2012-05-31T19:14:29Z