CW10.1 - How to determine code size?

ignisuti — Wed, 24 Aug 2011 01:48:42 GMT

How do I tell how much flash my code is using in CW 10.1?

In CW 6.3 I could open the XMAP file but I don't see that file or anything similar in CW 10.1.

Re: CW10.1 - How to determine code size?

TomSkwara — Thu, 25 Aug 2011 20:55:12 GMT

Try looking at the file XXX.afx.xMAP, where XXX is your project name. Here's a snippet from the bottom portion of the file:

# Link end time: Sun Aug 21 12:22:53 2011

# Memory map:

v_addr p_addr size name

00000000 00000000 00000410 .vectors vectorrom

00000410 00000410 00000000 .cfmprotect cfmprotrom

00000420 00000420 00011C98 .main_application rom

1FFF0000 000120B8 000019F0 .main_application_data ram

1FFF19F0 1FFF19F0 00002160 .main_application_bss ram

1FFF3B50 1FFF3B50 00000000 .kernel_data ram

2000FFF0 2000FFF0 00000000 .end_of_kernel_data end_of_kd

2000FA00 2000FA00 00000000 .boot_stack bstack

2000FBFF 2000FBFF 00000000 .end_of_boot_stack end_bstack

2000FBFF 00013AA8 00000018 .romp end_bstack

# Link start time: Sun Aug 21 12:22:52 2011