Linker file changes not sticking

barbercolman — Thu, 04 Aug 2011 00:05:42 GMT

Using CW10.1 and MQX I have changed the intflash.lcf file and recompiled. After exiting CW and reentering the changes to the linker file have not stuck. This has happened twice. I think this a CW not a MQX issue. Any idea what is happening.

Re: Linker file changes not sticking

CarlFST60L — Sat, 06 Aug 2011 06:32:03 GMT

I have made my own copy of the linker in the project directory and changed the project to use that Linker and never had a problem, maybe try that.

Copy the intial file, move it to you project directory, then, I put all mine in a folder called LCF, go to project properties and change the following

C/C++ Build > Settings > Tool Settings > (Cold Fiire Linker) > Linker Command File (.lcf)

change this to

${ProjDirPath}\LCF\MyLinkFile.lcf

Obviously make this match your setup

topic Linker file changes not sticking in Classic/Legacy CodeWarrior

Linker file changes not sticking

Re: Linker file changes not sticking