Classic/Legacy CodeWarriorのトピックProblem with connecting DemoBoard through JTAG.

Problem with connecting DemoBoard through JTAG.

Ranjicgnr — Sun, 20 Apr 2008 20:01:07 GMT

Hello..

I have a problem with my 56F8013 demo board. I am using code warrior hibrid controller ide. My bad luck i change the setting " Initilize unused GPOI's" as input. Earlier it was uninitilized. After that i cant debugg the pgrogramm using the demo board. Again i changed the setting to uninitilized. then also an error message is comming. It is tellig " the core is not connect". If i am using some other board which is having 56F8013 it is working. How can i solve this problem. That setting i have changed is there in Proccessor bean. And my JTAG connection is through parrel port.

ranji

Re: Problem with connecting DemoBoard through JTAG.

trytohelp — Wed, 23 Apr 2008 20:08:07 GMT

Hi,

I suggest you to log your request to the Freescale CRM system.
Please use Freescale on line support web page.
- Go to following URL: http://www.freescale.com/TechSupport
- Click on Submit a Service Request to create a new one or Manage Existing Service Request.
- You will come to a login page.
- You can submit your request through the web from there or view the activities of a SR.

Probably this SR will be handle by several teams CodeWarrior and DSC hardware.

Regards

Pascal

Re: Problem with connecting DemoBoard through JTAG.

Ranjicgnr — Fri, 25 Apr 2008 17:01:23 GMT

thanks.

I have send my requiest to them. I am waiting its replay.