USB TAP only stopped once at break point?

kk_cad — Sat, 18 Sep 2010 03:11:30 GMT

Hello, Everyone:

I've been using this USB TAP as in circuit debugger to debug code in MC56F8300. However, this USB TAP seems only stopped once at the break point. It supposed to stop repeatedly at the break point where I set in certain routine (e.g. timer). What happened is that my program stopped the very first time at this break point and after I clicked run button, it keeps running and never stopped at the same break point again. BTW I knew my program works but just the debugger does not stop. Any idea how to fix this?

I am using CodeWarrior IDE Ver 5.6.1.1658.

Debugger Settings are:

Always reset on download (Checked)

Use initialization file: 56836x_flash.cfg

Breakpoint Mode: Automatic

Auto-clear previous hardware breakpoint: unchecked

Target OS: BareBoard

Processor: M56F8367

Thanks a lot,

Re: USB TAP only stopped once at break point?

kk_cad — Tue, 21 Sep 2010 22:29:32 GMT

The was a bug in my program. A interrupt flag bit was not cleared which caused this isr always triggered and prevented debugger stopped at break point set in other isr. After clearing this flag, this problem was resolved.

topic USB TAP only stopped once at break point? in Classic/Legacy CodeWarrior

USB TAP only stopped once at break point?

Re: USB TAP only stopped once at break point?