Classic/Legacy CodeWarriorのトピックS08 - Defining more than one segment rule syntax ?

S08 - Defining more than one segment rule syntax ?

airbusboy20 — Fri, 07 Sep 2007 18:12:04 GMT

In my mc9s08 .prm file, one particular code segment has a requirement for more than one rule, ie, i'd like to use both the RELOCATE_TO and the FILL rules, as per :-

ROM_IMAGE = READ_ONLY 0xFC00 TO 0xFDFF

RELOCATE_TO 0x01B8
FILL 0xFF;

Unfortunately, i'm having problems with the syntax as whenever i attempt to asign more than one rule, i get a compilation error stating that i have a missing ';' after the first rule.

I can specify either rule individually, but not together.

Am i missing something here ? Of course, i'm assuming that i can apply more than one rule...

Thanks

Gary

Message Edited by airbusboy20 on 2007-09-07 12:18 PM

Message Edited by airbusboy20 on 2007-09-07 12:18 PM

--
Alban Edit: FSL Part Number in Subject line + split/moved to appropriate location.

Message Edited by Alban on 2007-09-07 02:13 PM

Re: Defining more than one segment rule syntax ?

CrasyCat — Fri, 07 Sep 2007 20:05:44 GMT

Hello

I get it working writing

ROM_IMAGE = READ_ONLY 0xFC00 TO 0xFDFF

RELOCATE_TO 0x01B8
ALIGN 1 FILL 0xFF;

I do not see the reason why you are trying to do that though. The memory area 0xFC00 TO 0xFDFF will be filled up with 0xFF but I am not sure this sis what you are looking for.

According to my understanding it should be possible to use RELOCATE_TO and FILL without ALIGN.

I would recommend you to submit a service request for that.

Click here to submit a service request.

Make sure to attach a reproducible project and installed product information to the service request.
To generate the required information:
- Start CodeWarrior
- Open the project
- Select "Help" -> "Pack and Go" and follow instructions on the screen.

Attach the generated .zip file to the SR.

CrasyCat