ColdFire/68K Microcontrollers and ProcessorsのトピックRe: Is this possible? https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/Is-this-possible/m-p/131665#M964 <HTML><HEAD></HEAD><BODY><DIV>Very difficult I think. But codewarrior very easy .</DIV></BODY></HTML> Tue, 10 Oct 2006 08:31:09 GMT gxd 2006-10-10T08:31:09Z Is this possible? https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/Is-this-possible/m-p/131664#M963 <HTML><HEAD></HEAD><BODY><DIV> </DIV><DIV>Hello, I am new to this forum as well as Freescale MPUs and all MPUs for that matter. I am currently looking into building a high speed single board computer to analyze sensor data on a mobile robot. I have experience programming MicroChips PIC MCUs in BASIC. I have no background in C however. I am wondering if it would be seem possible to build a small computer based on PowerPC or ColdFire MPUs capable of operating at around 5,000 MIPS and have it programmed in under 5 months. &nbsp;I know that this might seem ridiculous but I simply need the processing power and I am on a tight schedule. I could also use several small computers running slower&nbsp;for this application. I appreciate any help/suggestions!&nbsp;</DIV></BODY></HTML> Thu, 28 Sep 2006 12:54:56 GMT https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/Is-this-possible/m-p/131664#M963 ALFRED 2006-09-28T12:54:56Z Re: Is this possible? https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/Is-this-possible/m-p/131665#M964 <HTML><HEAD></HEAD><BODY><DIV>Very difficult I think. But codewarrior very easy .</DIV></BODY></HTML> Tue, 10 Oct 2006 08:31:09 GMT https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/Is-this-possible/m-p/131665#M964 gxd 2006-10-10T08:31:09Z