ColdFire/68K Microcontrollers and ProcessorsのトピックRe: MCF52223 bsp

MCF52223 bsp

michele_darold — Mon, 25 Feb 2008 21:21:05 GMT

Hi, is available a bsp for MCF52223 mcu?

Regards

Michele Da Rold

Re: MCF52223 bsp

RickN — Tue, 26 Feb 2008 10:27:05 GMT

Hi Michele,

There is free USB Stack Software for the MCF5222x family of ColdFire Microcontrollers with USB 2.0 Host/Device/OnTheGo interface. This software was written by CMX Systems, is provided in source code that can be built with CodeWarrior for ColdFire v6.4. It is called the CMX_USB-Lite stack, and can be downloaded from the Freescale website:

www.freescale.com/coldfire

There are other choices for operating system software that will run on the MCF5222x, including a new port of uTasker (www.uTasker.com).

Thanks,

Rick

Re: MCF52223 bsp

michele_darold — Tue, 26 Feb 2008 18:06:01 GMT

ok, for the usb stack I have already download and used it,

my question is about the availabilty of a gnu toolchain that support MCF 52223 mcu from freescale, I have see uTasker but I think it only support MCF5223x that isn't my mcu or I'm wrong?

Regards

Re: MCF52223 bsp

RickN — Tue, 26 Feb 2008 20:04:20 GMT

Hi,

Check out CodeSourcery for the GNU tools: http://www.codesourcery.com/gnu_toolchains/coldfire

I believe uTasker now supports the MCF52223 family of MCUs with integrated USB 2.0 in addition to the MCF5223x MCUs with integrated 10/100 BaseT Etherenet.

Thanks,

Rick

Re: MCF52223 bsp

michele_darold — Tue, 26 Feb 2008 21:00:18 GMT

Ok, I'll check.

Thank you for your help

Michele Da Rold