ColdFire/68K Microcontrollers and ProcessorsのトピックRe: New to TCP\IP need help....

New to TCP\IP need help....

satinderKhera — Fri, 23 Apr 2010 13:38:14 GMT

Hi All,

I am new to TCP\IP and want to develop a server application with MCF52259 i.e my board will be in listening mode and the communication will be initiated by a remote client. For developing this application I am using FNET stack for freescale. To develop my confidence I am trying to recieve a byte from remote client and send the same back to the client but I am unable to do it. I am pasting my test code, can someone help me and suggest if I am doing something wrong.

/*******************************/

int main(void)
{

int   server_socket,client_socket;
unsigned int   data_length = 1;
int   data_length1 = 1;
unsigned int   RecvMsgSize=0;
char   TCPIPRxBuffer[256];
struct sockaddr_in    server_address,client_address;

/*creating a listening socket*/
server_socket = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP);

/*filling the relevant data */
fnet_memset(&server_address, 0, sizeof(server_address));
server_address.sin_family = AF_INET;
server_address.sin_addr.s_addr = INADDR_ANY;
server_address.sin_port = 1234;

/*binding the socket address to the listening socket*/
if((FNET_OK == bind(server_socket, (struct sockaddr *) &server_address,sizeof(server_address))))
{
/*binding successful*/
}
else
{
fnet_printf("\nbinding error\n");
}

if((FNET_OK == listen(server_socket, 10)))
{
           /*listening on socket*/
}
else
{
fnet_printf("\nlistening error\n");
}

    while (TRUE)
   {
        /*waiting for a connection and accepting it*/
       data_length1 = sizeof(client_address);
       client_socket = accept(server_socket,(struct sockaddr *) &client_address,
       &data_length1);

       /*recieving from accepted connection*/
       if(FNET_OK == recv(client_socket,(char*)TCPIPRxBuffer,data_length1,0))
       {

       }

       send(client_socket, (char*)TCPIPRxBuffer, 256, 0);

       /*closing the socket*/
       if(FNET_OK == closesocket(client_socket))
       {

       }
       else
       {
           fnet_printf("\nsocket closing error\n");
        }
    }

}

Please suggest whether I am missing something or doing something wrong.

Regards,

Satinder Singh

Re: New to TCP\IP need help....

butok — Fri, 23 Apr 2010 14:17:54 GMT

Hi Satinder Singh,

I see several issues in the code:

- the code is written by the way that accept(), recv() and send() are blocked. They are not blocked.

- the code does not check the accept() return value.

- the code checks recv() for FNET_OK. The recv() never returns FNET_OK: http://fnet.sourceforge.net/manual/group__fnet__socket_ga554ce7ef429f34cc322dff78061d60ab.html#ga554ce7ef429f34cc322dff78061d60ab

More info: http://fnet.sourceforge.net/manual/group__fnet__socket.html

To avoid most of the issues, as a reference for your server code you can use the sources provided with the FNET project, for example the HTTP, TELNET servers.

Best regards,

Andrey Butok

Re: New to TCP\IP need help....

satinderKhera — Fri, 23 Apr 2010 16:34:42 GMT

Dear Mr. Butok,

Thanks for your reply, from the issues raised by you I understand the following things:

- the code is written by the way that accept(), recv() and send() are blocked. They are not blocked.

I understand that I need to set the socket option to blocking mode for the client socket i.e.I need to add the following line in the code after calling accept( )

if(FNET_OK == setsockopt(client_socket, SOL_SOCKET, SO_BLOCKING, (char*)&data_length1, sizeof(client_socket)))

- the code does not check the accept() return value.

I need to chek the accept( ) success\failure

if((client_socket = accept(server_socket,(struct sockaddr *) &client_address,
&data_length1))>0)

this is required to be done.

- the code checks recv() for FNET_OK. The recv() never returns FNET_OK

this check is to be removed.

I will do the changes suggested by you and will get back to you after trying these changes.

Thanks & Regards,

Satinder Singh

Re: New to TCP\IP need help....

satinderKhera — Tue, 27 Apr 2010 18:01:04 GMT

Dear Sir,

I tried after implementing the changes suggested by you, but I am still unable to communictae through TCP\IP. I have done the changes as shown below:

    /*waiting for a connection and accepting it*/
       data_length1 = sizeof(client_address);
       if((client_socket = accept(server_socket,(struct sockaddr *) &client_address,
       &data_length1))>0)
       {
           if(FNET_OK == setsockopt(client_socket, SOL_SOCKET, SO_BLOCKING, (char*)&data_length1, sizeof(client_socket)))
           {

               /*recieving from accepted connection*/
               recv(client_socket,(char*)TCPIPRxBuffer,data_length1,0);

                send(client_socket, (char*)TCPIPRxBuffer, 256, 0);
               /*closing the socket*/
           }
       }
       closesocket(client_socket));

Please comment if i am still doing something wrong and suggest the correction.

Regards,

Satinder Singh