topic RD3152mma7260Q and labview? in ColdFire/68K Microcontrollers and Processors https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/RD3152mma7260Q-and-labview/m-p/191284#M8321 <HTML><HEAD></HEAD><BODY><DIV>Hello,</DIV><DIV>First post here, hope it is in the correct place.</DIV><DIV>I am trying to get X,Y,Z data out of the ZSTAR accelerometer eval board into Labview.&nbsp; I can recognise the USB reciever in Labview, but am having problems understanding how to communicate with this device.&nbsp; Could somebody steer me in the correct direction please?&nbsp; I am new to Freescale product, but am very familiar with LabView and am really having problems on where to start with getting these 2 systems to talk with each other.&nbsp; ANY input would be greatly appreciated, suggested reading, links whatever!&nbsp; Like I said I am just starting down this path and all comments suggestion would be welcome.</DIV><DIV>Cheers,</DIV><DIV>Z</DIV></BODY></HTML> Wed, 20 Feb 2008 02:39:30 GMT Zeder 2008-02-20T02:39:30Z RD3152mma7260Q and labview? https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/RD3152mma7260Q-and-labview/m-p/191284#M8321 <HTML><HEAD></HEAD><BODY><DIV>Hello,</DIV><DIV>First post here, hope it is in the correct place.</DIV><DIV>I am trying to get X,Y,Z data out of the ZSTAR accelerometer eval board into Labview.&nbsp; I can recognise the USB reciever in Labview, but am having problems understanding how to communicate with this device.&nbsp; Could somebody steer me in the correct direction please?&nbsp; I am new to Freescale product, but am very familiar with LabView and am really having problems on where to start with getting these 2 systems to talk with each other.&nbsp; ANY input would be greatly appreciated, suggested reading, links whatever!&nbsp; Like I said I am just starting down this path and all comments suggestion would be welcome.</DIV><DIV>Cheers,</DIV><DIV>Z</DIV></BODY></HTML> Wed, 20 Feb 2008 02:39:30 GMT https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/RD3152mma7260Q-and-labview/m-p/191284#M8321 Zeder 2008-02-20T02:39:30Z Re: RD3152mma7260Q and labview? https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/RD3152mma7260Q-and-labview/m-p/191285#M8322 <HTML><HEAD></HEAD><BODY><DIV>Hi Zeder,</DIV><DIV>&nbsp;The reference manual for ZSTAR can be found at the link below.&nbsp; Page 42&nbsp;describes the&nbsp;text-based protocol which communicates over a usb using the virtual serial port class.&nbsp; Therefore in Labview you should be able to use a VISA Serial Com port instance to interface with the usb stick.&nbsp; You just have to know what com port on your PC the usb stick is assigned to.</DIV><DIV>&nbsp;</DIV><DIV><A href="http://www.freescale.com/files/sensors/doc/ref_manual/ZSTARRM.pdf?fsrch=1" rel="nofollow" target="_blank">http://www.freescale.com/files/sensors/doc/ref_manual/ZSTARRM.pdf?fsrch=1</A></DIV><DIV>&nbsp;</DIV><DIV>Best of luck.</DIV><DIV>MacL</DIV></BODY></HTML> Sat, 23 Feb 2008 03:38:07 GMT https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/RD3152mma7260Q-and-labview/m-p/191285#M8322 macl 2008-02-23T03:38:07Z