How to compile the 2.6 kernel version for the MCF5208EVB platform

Dietrich — Sat, 01 Apr 2006 07:32:59 GMT

This message contains an entire topic ported from the WildRice - Coldfire forum. Freescale has received the approval from the WildRice administrator on seeding the Freescale forum with messages. The original message and all replies are in this single message. We have seeded this new forum with selected information that we expect will be of value as you search for answers to your questions. Freescale assumes no responsibility whatsoever with respect to Posted Material. For additional information, please see the Terms of Use - Message Boards and Community Forums. Thank You and Enjoy the Forum!

Dec 13, 2005, 3:15 AM

Post #1 of 2 (34 views)
Copy Shortcut
[ColdFire] How to compile the 2.6 kernel version for the MCF5208EVB platform Can't Post

--------------------------------------------------------------------------------

Hi all:

I would like to know how to compile the 2.6 kernel version for the
MCF5208EVB evaluation
board. I have downloaded the latest release from
http://www.uclinux.org/ports/coldfire/uClinux-dist-20051110.tar.gz
but this platform is not supported, as I can see. Also I would like to
know if there is any patch
for this release to support the MCF5208EVB board.

Thanks.

Javier

--------------------------------------------------------------------
Dec 13, 2005, 4:07 AM

Post #2 of 2 (34 views)
Copy Shortcut
Re: [ColdFire] How to compile the 2.6 kernel version for the MCF5208EVB platform [In reply to] Can't Post

--------------------------------------------------------------------------------

Hi Javier,

Ruiz de Munain wrote:
> I would like to know how to compile the 2.6 kernel version for the
> MCF5208EVB evaluation
> board. I have downloaded the latest release from
> http://www.uclinux.org/ports/coldfire/uClinux-dist-20051110.tar.gz
> but this platform is not supported, as I can see. Also I would like to
> know if there is any patch
> for this release to support the MCF5208EVB board.

It is in the latest test release, get that package at:

http://www.uclinux.org/pub/uClinux/dist/uClinux-dist-test-20051027.tar.gz

(Its code base is more recent than the 20051110 release - even though
it has a slightly older date code).

Regards
Greg

------------------------------------------------------------------------
Greg Ungerer -- Chief Software Dude EMAIL:
SnapGear -- a CyberGuard Company PHONE: +61 7 3435 2888
825 Stanley St, FAX: +61 7 3891 3630
Woolloongabba, QLD, 4102, Australia

--------------------------------------------------------------------

Message Edited by Dietrich on 04-03-2006 10:55 AM

Message Edited by Dietrich on 04-04-2006 09:12 PM

ColdFire/68K Microcontrollers and ProcessorsのトピックHow to compile the 2.6 kernel version for the MCF5208EVB platform

How to compile the 2.6 kernel version for the MCF5208EVB platform