topic CF Flasher for M52259? in ColdFire/68K Microcontrollers and Processors

CF Flasher for M52259?

mjbcswitzerland — Sun, 24 May 2009 03:56:44 GMT

Hi All

Does anyone know whether there will be a new release of the CF Flasher to support programming the Kirin3 - M5225x devices?

Regards

Mark

Re: CF Flasher for M52259?

tr111 — Wed, 27 May 2009 10:20:58 GMT

No! you must do yourself!
or the CodeWarrior IDE have the flash programmer!

Re: CF Flasher for M52259?

tr111 — Wed, 27 May 2009 10:34:13 GMT

if your are the utasker's mark!
email to me tr111@sina.com
I will give you the file,I have finished the CF Flasher config for the mcf52259!
Because I use you utasker and your are very good at the utasker about the coldfire!

Re: CF Flasher for M52259?

bkohan — Thu, 07 Oct 2010 22:35:19 GMT

tr111,

Can you share this 52259 algorithm with the commnity? I would like to use it.

Thanks,

B.K.

Re: CF Flasher for M52259?

alager — Sat, 04 Dec 2010 01:58:39 GMT

Is CF Flasher being given out for the 52259? It's obvious that there is a version that was given to the uTasker guy, how about the rest of us that find the utility extremely useful and are moving on to bigger/newer chips?

Thanks,

Aaron

Re: CF Flasher for M52259?

HLaidet — Sat, 04 Dec 2010 19:09:38 GMT

Hello

i use CFFlasher V3.1.10 and PE_USB_ML

the algo for MCF52259 is "CFM(512).alg" it is already in "CFFlasher\alg".

you only have to generate the config file for your board.

i generated "DigibutlerK3.cfg" for my board (MCF52259).

using internal oscillator when starting

CLKMOD0=0 (pull-down), CLKMOD1=0 (pull-down), XTAL=1 (10k pup resistor).

Regards,

Henri

Re: CF Flasher for M52259?

RuiFaria — Thu, 19 Apr 2012 22:56:29 GMT

Hi Henri,

Did you try to use CFFlasher by command-line?

I only can use it by GUI!

Best Regards,

Rui Faria

Re: CF Flasher for M52259?

ssinfod — Thu, 17 Mar 2016 01:19:01 GMT

Here are the files. (see attached zip).

Maybe it could be useful for somebody !