ColdFire/68K Microcontrollers and ProcessorsのトピックRe: Processor expert for the 5474 https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/Processor-expert-for-the-5474/m-p/180693#M7357 <HTML><HEAD></HEAD><BODY><DIV></DIV><P>Hi</P><P>I don't know about Processor Expert, but in case it helps there's a similar tool called ColdFire Init.</P><BR /><P>CFinit is a graphical tool to let you configure a ColdFire processor, including the peripherals. It then writes the initialisation code for you in assembler or C. It includes support for most of the V2, V3 and V4 processors including the 5474.</P><BR /><P>The development of the tool was funded by Freescale, so CFInit is available as a free download. You can get it from MicroAPL's web site: &nbsp;&nbsp;&nbsp;&nbsp;<A href="http://www.microapl.co.uk/cfinit" rel="nofollow" target="_blank">http://www.microapl.co.uk/cfinit" rel="nofollow" target="_blank</A></P><P><A href="http://www.microapl.co.uk/CFInit/cfinit_main.html" rel="nofollow" target="_blank">http://www.microapl.co.uk/CFInit/cfinit_main.html</A></P><BR /><P>Hope this helps</P><BR /><P>Simon</P></BODY></HTML> Tue, 19 Aug 2008 16:26:28 GMT SimonMarsden_de 2008-08-19T16:26:28Z Processor expert for the 5474 https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/Processor-expert-for-the-5474/m-p/180692#M7356 <HTML><HEAD></HEAD><BODY><DIV>I was wondering if you what the schedule was to include the 5474 in the codewarrior processor expert?</DIV></BODY></HTML> Tue, 19 Aug 2008 01:00:51 GMT https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/Processor-expert-for-the-5474/m-p/180692#M7356 mccombbj 2008-08-19T01:00:51Z Re: Processor expert for the 5474 https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/Processor-expert-for-the-5474/m-p/180693#M7357 <HTML><HEAD></HEAD><BODY><DIV></DIV><P>Hi</P><P>I don't know about Processor Expert, but in case it helps there's a similar tool called ColdFire Init.</P><BR /><P>CFinit is a graphical tool to let you configure a ColdFire processor, including the peripherals. It then writes the initialisation code for you in assembler or C. It includes support for most of the V2, V3 and V4 processors including the 5474.</P><BR /><P>The development of the tool was funded by Freescale, so CFInit is available as a free download. You can get it from MicroAPL's web site: &nbsp;&nbsp;&nbsp;&nbsp;<A href="http://www.microapl.co.uk/cfinit" rel="nofollow" target="_blank">http://www.microapl.co.uk/cfinit" rel="nofollow" target="_blank</A></P><P><A href="http://www.microapl.co.uk/CFInit/cfinit_main.html" rel="nofollow" target="_blank">http://www.microapl.co.uk/CFInit/cfinit_main.html</A></P><BR /><P>Hope this helps</P><BR /><P>Simon</P></BODY></HTML> Tue, 19 Aug 2008 16:26:28 GMT https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/Processor-expert-for-the-5474/m-p/180693#M7357 SimonMarsden_de 2008-08-19T16:26:28Z