MCF52233DEMO

sharda — Tue, 05 May 2009 13:21:50 GMT

Hi all,

Has anybody worked on .S19 uploading through ethernet using MCF52233DEMO board........

Plz give your email id to shardamba@unifiedst.com

-Sharda

Re: MCF52233DEMO

RichTestardi — Tue, 05 May 2009 21:59:02 GMT

Hi,

If you want to see S19 parsing and upload thru Ethernet, I have an example in my skeleton source code project, skeleton.zip, at the bottom of this page:

http://www.cpustick.com/downloads.htm

Basically, that skeleton will build a command-line interface for about a dozen different MCUs -- you only need to follow the MCF52233 #if's. Most of the code you care about is in flash_upgrade(), in sources/flash.c. You can enter an "upgrade" command and then paste an S19 file into a terminal emulator window connected to port 1234 of the DHCP address, and the system will upgrade its flash memory.

-- Rich

topic MCF52233DEMO in ColdFire/68K Microcontrollers and Processors

MCF52233DEMO

Re: MCF52233DEMO