ColdFire/68K Microcontrollers and ProcessorsのトピックM52277EVB dBug

M52277EVB dBug

ianlovatt — Tue, 16 Feb 2010 01:54:59 GMT

Does anyone know why the M52277EVB dBug project available here does not run from flash?

http://www.freescale.com/webapp/sps/download/license.jsp?colCode=M52277EVB_DBUG_SRC&location=null&fsrch=1&Parent_nodeId=from search&Parent_pageType=from search

Both RAM and FLASH targets run when debugging in CW but the program fails to start when the EVB is power cycled away from the debugger. Unless I've missed something fundamental about how the dBug project works I believe it should execute from flash like any other program...

Cheers

ian

Re: M52277EVB dBug

cw_weldon — Wed, 17 Feb 2010 04:34:15 GMT

You can diconnect the Multilink and reset the board to see if this brings it up.

Re: M52277EVB dBug

ianlovatt — Wed, 17 Feb 2010 21:38:02 GMT

Yes that's what i'm doing, once the board is flashed it should startup after reset without the multilink connected but it doesn't. I know the h/w is fine as other projects startup ok.