ColdFire/68K Microcontrollers and ProcessorsのトピックRe: i.MX21 (ADS21) GPIO interrupt

i.MX21 (ADS21) GPIO interrupt

Mario — Sat, 02 Sep 2006 00:06:36 GMT

Hi,

Has anyone had success creating gpio interrupts for the ADS21 board? I looked at the GpioClass.cpp and the mx21ddk.dll, they contain methods to access gpios and enable/disable interrupts, but I did not find any methods to catch a gpio event from which I can call from a managed code application.

The alternative that I thought of was to extend the keyboard library, i.e. make it more than 6X6 as used in the board.

Any pointers where I can find information/documents on how to implement any of the two points above is appreciated. Also, if this is the wrong forum to post this kind of question, I would appreicate it if you could point me tot he right forum. Thanks.

--mario

Re: i.MX21 (ADS21) GPIO interrupt

Mario — Sat, 02 Sep 2006 00:09:46 GMT

Hi,

Forgot to mention that I am running WinCe 5.0 on this board and my managed app is in C#.

-- mario

Re: i.MX21 (ADS21) GPIO interrupt

nyrbyk — Thu, 16 Nov 2006 18:41:14 GMT

I' ve done interrupt catching from GPIO under WinCe5.00 but using Plateform builder and C code so you can activate interrupt from GPIO (:-)).

But for that you need to register interrupt handler using WinCe function as KernelLibIOCtrl etc..

See WinCE doc on MSDN web site for details. But accesing this with managed code won't be direct I think

Nyrbyk