ColdFire/68K Microcontrollers and Processors中的主题 Re: Creating build + MCF52233 processor + MCF52212 processor

Creating build + MCF52233 processor + MCF52212 processor

Lakshmi — Mon, 04 Jan 2010 13:11:50 GMT

Hi, We have used MCF52233 processor for Master board & MCF52212 for Slave.

We have completed the implementation & testing of the project & now in RELEASE cycle. In the Customer's site Field Application Engineer will not be provided with the code warrior IDE to download the firmware using BDM.

We need to create a setup file, which can used to program incremental versions of firmware to the PCBs.

Could you please tell us, what are the supporting files required to create the build?

FYI: MCF52233 uses Interniche TCPIP_ClodeFire_Lite multithreading RTOS project as a code base. MCF52212 is not multithreading RTOS

Re: Creating build + MCF52233 processor + MCF52212 processor

MCF52233 — Mon, 04 Jan 2010 14:00:04 GMT

Hi ,

u can also use CFlasher for loading program thru BDM.

u can also create separate exe file which read ur s19/Bin file and increment ur FIRMWARE VERSION or may be PCB nos. n then load it

Re: Creating build + MCF52233 processor + MCF52212 processor

Lakshmi — Mon, 04 Jan 2010 14:03:09 GMT

Hi,

Thank you for the quick response.

Could you plaese tell me, where can I get CFlasher from?

Re: Creating build + MCF52233 processor + MCF52212 processor

MCF52233 — Mon, 04 Jan 2010 14:53:20 GMT

Check here,

http://www.freescale.com/files/soft_dev_tools/software/programmers/CFFLASHER.zip

Re: Creating build + MCF52233 processor + MCF52212 processor

scifi — Mon, 04 Jan 2010 18:13:34 GMT

You could also implement some kind of a boot loader to support new firmware image upload using communications interfaces present on your board. It does take some effort, but it can make the firmware upgrade procedure more user-friendly.

Re: Creating build + MCF52233 processor + MCF52212 processor

mjbcswitzerland — Mon, 04 Jan 2010 23:47:44 GMT

A SREC loader (requires about 10k space) for these devices is available at www.uTasker.com. User's guide http://www.utasker.com/docs/uTasker/uTaskerSerialLoader.PDF

It also supports loading via USB and Ethernet (optionally encrpted) but not as stand-alone loader (requires 2k in this case).

Regards

Mark