ColdFire/68K Microcontrollers and ProcessorsのトピックRe: Setting VBR on 5282 https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/Setting-VBR-on-5282/m-p/162769#M5327 <HTML><HEAD></HEAD><BODY><DIV>Hi SVC1,</DIV><DIV>&nbsp;</DIV><DIV>The vector table must be located on a 1MByte boundary, and so you will not be able to place it at 0x8000. I think that you will need the vector table at 0x0000_0000.</DIV><DIV>&nbsp;</DIV><DIV>Mark.</DIV></BODY></HTML> Tue, 10 Jun 2008 06:19:31 GMT UK_CF_FAE 2008-06-10T06:19:31Z Setting VBR on 5282 https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/Setting-VBR-on-5282/m-p/162768#M5326 <HTML><HEAD></HEAD><BODY><DIV> </DIV><DIV><DIV>Hi,</DIV><DIV>&nbsp;</DIV><DIV>I would like to keep the interrupt table into internal flash.</DIV><DIV>&nbsp;</DIV><DIV>I would like my application to be at address 0x8000, how do I set up the VBR to this address (since the lower 20 bits are not implemented)?</DIV><DIV>&nbsp;</DIV><DIV>Thanks,</DIV><DIV>Simon</DIV><DIV>&nbsp;</DIV></DIV></BODY></HTML> Tue, 10 Jun 2008 02:03:22 GMT https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/Setting-VBR-on-5282/m-p/162768#M5326 SVC1 2008-06-10T02:03:22Z Re: Setting VBR on 5282 https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/Setting-VBR-on-5282/m-p/162769#M5327 <HTML><HEAD></HEAD><BODY><DIV>Hi SVC1,</DIV><DIV>&nbsp;</DIV><DIV>The vector table must be located on a 1MByte boundary, and so you will not be able to place it at 0x8000. I think that you will need the vector table at 0x0000_0000.</DIV><DIV>&nbsp;</DIV><DIV>Mark.</DIV></BODY></HTML> Tue, 10 Jun 2008 06:19:31 GMT https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/Setting-VBR-on-5282/m-p/162769#M5327 UK_CF_FAE 2008-06-10T06:19:31Z