topic JM Badge Board Trouble in ColdFire/68K Microcontrollers and Processors

JM Badge Board Trouble

Kiwi — Wed, 16 Dec 2009 14:28:58 GMT

Hi,

just got the Flexis JM Badge Board. Connecting it to my Win7 machine has it shown in the Device Manager as a HID Keyboard device and also under Human interface Devices as a USB input device. I have tried to manually update the driver from the Windows7SensorDevKit->Drivers->Binaries->AMD64->SensorBadgeDriver but it fails.

There is another post that describes connecting the board via USB, then hitting E8 twice (http://forums.freescale.com/freescale/board/message?board.id=CFCOMM&message.id=7930&query.id=173070#M7930) , but this totally freaked out my computer.

So I am stuck, all the preloaded demos work. Pluggin in via usb then hitting E5 and then E8 allow me to use the touch sensors as buzzer notes. Besides that I got nothing.

Any help would be most appreciated,

Kind regards,

Kiwi

Re: JM Badge Board Trouble

mnorman — Thu, 17 Dec 2009 04:35:48 GMT

Hi, Kiwi,

Can you get the USB bootloader mode (mass storage device) to enumerate correctly?

Does this post help?

http://forums.freescale.com/freescale/board/message?board.id=CFCOMM&message.id=7930#M7930

Re: JM Badge Board Trouble

Kiwi — Thu, 17 Dec 2009 13:01:44 GMT

Hi MNorman,

you know I had actually read that post, but didn't get it. So you pointing me back to it, a fresh day, and all is good. My many thanks for such a speedy reply. The board is simply brilliant. Everything I hoped it would be having watched the PDC videos of it.

Cheers,

Kiwi