topic Re: emg_web_uploader (source code ) in ColdFire/68K Microcontrollers and Processors

emg_web_uploader (source code )

gl035 — Tue, 10 Mar 2009 07:10:29 GMT

Bonjour

where found the source code of emg_web_uploader.exe

for changing the IP port.

Merci

GL035

Re: emg_web_uploader (source code )

JaimeR — Tue, 10 Mar 2009 22:12:03 GMT

Hi, in order to execute the emg_web_uploader.exe there is a Make.bat file, if you open this file

with notepad, you will see the current IP , just change this IP and save the changes. Execute the .bat

file.

Jaime

Re: emg_web_uploader (source code )

gl035 — Tue, 10 Mar 2009 22:57:17 GMT

Good morning

excuse me for my English. I am French

As I have a lot http server on my reseau.

I programmed the bigibutler with address IP = 192.168.0.151 and port = 86

since emg_web_uploader.exe me répond:

E:\DIGIBUTLER\web_page>emg_web_uploader 192.168.0.151 dynamic.ffs joshua
Web page / Firmware Uploader for EMG HTTP server
Written by Eric Gregori
Failed trying to connect to ip address: 192.168.0.151 emg_web_uploader:
connect failed: Unknown error (10054)
E:\DIGIBUTLER\web_page>pause
Appuyez sur une touche pour continuer...

Is for it that I search the sources of emg_web_uploader.exe

to be able to cross in parameter the numero of the port IP

for exemple:

emg_https_uploader (ip address) (ip port) (filename) (key)

Thank you Jaime R for your answer

GL 035

http://st-medard-35.dyndns.org:86 to see my digitbutler

Re: emg_web_uploader (source code )

JaimeR — Wed, 11 Mar 2009 05:45:36 GMT

Sorry, I don't know if the source code is available for emg_web_uploader.exe . I also don't know if there is necesary to change the port or/and how to do it.

Can you ping the board from your PC?, Just to make sure that you have a connection working.

Re: emg_web_uploader (source code )

gl035 — Wed, 11 Mar 2009 06:51:37 GMT

Thank you Jaime R

My link rs232 works perfectly of that I compiled the bigibutler in IP 192.168.0.151 port 80.

I can therefore recharge the file freescale_static_ffs.c

To resolve problem I took the file freescale_static_ffs.c (make with make_static.bat) in the directory web_page then copied out in the directory of plan \SW_Main_Board\src\projects\example\freescale_HTTP_Web_Server then I re-compiled the bigibutler in IP 192.168.0.151 port 86.

It is a tiring resolution !

It is for it that I like to cross in parameter the number of the port IP as emg_web_uploader.exe

Cordialement GL035