topic Re: MCF5221X debugger / programmer in ColdFire/68K Microcontrollers and Processors https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/MCF5221X-debugger-programmer/m-p/148277#M3592 <HTML><HEAD></HEAD><BODY><P>Read through to the end of the "TBLCF-open-source-debugging-cable" thread that is anchored to the top of this forum.</P><P>&nbsp;</P></BODY></HTML> Thu, 23 Sep 2010 07:09:05 GMT TomE 2010-09-23T07:09:05Z MCF5221X debugger / programmer https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/MCF5221X-debugger-programmer/m-p/148276#M3591 <HTML><HEAD></HEAD><BODY><P>Hello,</P><P>I bought this TBLCF board <A _jive_internal="true" href="https://community.nxp.com/external-link.jspa?url=http%3A%2F%2Fwww.cncgeeker.com%2Findex.php%3Fmain_page%3Dproduct_info%26cPath%3D7_4%26products_id%3D9%26zenid%3D092a0a87458f9d2fe4fb87ca4193fa74" rel="nofollow" target="_blank">http://www.cncgeeker.com/index.php?main_page=product_info&amp;cPath=7_4&amp;products_id=9&amp;zenid=092a0a87458f9d2fe4fb87ca4193fa74</A> and I would like to program my MCF52213 MCU. As far as now I noticed that my MCU is not in the supported list of the board.</P><P>&nbsp;</P><P>I tried to use the debugger to program my MCU but no success. I can see some activity on DSI pin (two square waves) and DSCLK pin (clocks, 120 kHz approx.) when I push Debug button in CodeWarrior IDE (v 7.2). But no activity on DSO pin. I get "can't connect" message in CodeWarrior. The MCU is powered by 3.3 V.</P><P>&nbsp;</P><P>&nbsp;Is there anyone who uses TBLCF together with&nbsp;MCF5221X and can give me some suggestion how to fix my problem?</P><P>&nbsp;</P><P>Thank you</P><P>&nbsp;</P><P>Martin</P></BODY></HTML> Sun, 19 Sep 2010 16:13:59 GMT https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/MCF5221X-debugger-programmer/m-p/148276#M3591 gaminn 2010-09-19T16:13:59Z Re: MCF5221X debugger / programmer https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/MCF5221X-debugger-programmer/m-p/148277#M3592 <HTML><HEAD></HEAD><BODY><P>Read through to the end of the "TBLCF-open-source-debugging-cable" thread that is anchored to the top of this forum.</P><P>&nbsp;</P></BODY></HTML> Thu, 23 Sep 2010 07:09:05 GMT https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/MCF5221X-debugger-programmer/m-p/148277#M3592 TomE 2010-09-23T07:09:05Z