ColdFire/68K Microcontrollers and ProcessorsのトピックRe: Creating a new project for custom board using Processor Expert and MQX https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/Creating-a-new-project-for-custom-board-using-Processor-Expert/m-p/147396#M3425 <HTML><HEAD></HEAD><BODY><P>Try searching in the PE forums for "MQX". I get 7 hits.</P><P>&nbsp;</P><P>Then search in the MQX forums for "expert". I get 40 hits.</P><P>&nbsp;</P><P>Tom</P><P>&nbsp;</P></BODY></HTML> Wed, 21 Mar 2012 05:34:37 GMT TomE 2012-03-21T05:34:37Z Creating a new project for custom board using Processor Expert and MQX https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/Creating-a-new-project-for-custom-board-using-Processor-Expert/m-p/147395#M3424 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P>&nbsp;</P><P>Is it possible to create a project that uses both processor expert and MQX?&nbsp; I have a custom board based on the MCF52258.&nbsp; I can create a project using PE, and it runs.&nbsp; I would like to add MQX as well.&nbsp; Is it possible (I have had no luck)</P><P>&nbsp;</P><P>thx</P></BODY></HTML> Tue, 20 Mar 2012 20:20:25 GMT https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/Creating-a-new-project-for-custom-board-using-Processor-Expert/m-p/147395#M3424 bwAL 2012-03-20T20:20:25Z Re: Creating a new project for custom board using Processor Expert and MQX https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/Creating-a-new-project-for-custom-board-using-Processor-Expert/m-p/147396#M3425 <HTML><HEAD></HEAD><BODY><P>Try searching in the PE forums for "MQX". I get 7 hits.</P><P>&nbsp;</P><P>Then search in the MQX forums for "expert". I get 40 hits.</P><P>&nbsp;</P><P>Tom</P><P>&nbsp;</P></BODY></HTML> Wed, 21 Mar 2012 05:34:37 GMT https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/Creating-a-new-project-for-custom-board-using-Processor-Expert/m-p/147396#M3425 TomE 2012-03-21T05:34:37Z