topic Re: Initialize Flexcan in MCF5282 in ColdFire/68K Microcontrollers and Processors

Initialize Flexcan in MCF5282

keikote — Tue, 06 Feb 2007 16:55:36 GMT

hello,

I'm trying to initialize the Flexcan port and sending a message.

I downloaded a demo "MCF5282SC" from "http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MCF5282&nodeId=0162468rH3YTLC00M95448" to try it but i don't know how can i test the flexcan port.

I try to use an osciloscope to see any signal but i don't get anything.

Can help anybody with the code and the hardware that is necessary to test the Flexcan port?

My board is a custom 5282 based in a 5282EVB.

Thanks in advance.

Re: Initialize Flexcan in MCF5282

PaoloRenzo — Mon, 12 Feb 2007 09:03:02 GMT

Did you try to use a code-init-tool like CFinit?

https://www.freescale.com/webapp/Download?colCode=COLDFIRE_INIT&prodCode=MCF5282&nodeId=0162468rH3YTLC00M95448&location=psp

I guess it will be a good software start point

About hardware, try to use the same transceiver as we did in our EVB or LITE boards.

Good luck.

Alban fixed link

Message Edited by Alban on 2007-02-12 12:18 PM