problem using the flash programmer

fabriceC — Thu, 30 Aug 2007 17:21:07 GMT

Hi,

I am using a M52233Demo card with Freescale CodeWarrior IDE version 5.7.0.

When I try to erase flash with the Tools>Flash Programmer Panel, I have the message :
   "PEMicroProtocolPlugin : An error occurred while trying to write memory".

The configuration I use in the Flash Programmer Panel is the following:
   use custom settings    : checked
   target processor          : 5223x
   connection                   : PEMICRO_USB
   use target initialization : unchecked

   target memory buffer address : 0x0 ( default value)
   target memory buffer size        : 0x6000 (default value)

   device                                    : CFM_MCF52233_25MHz
   flash memory base address : 0xffe00000 (default value)

   erase sectors individually : unchecked
   all sectors                         : checked

When I try to debug in RAM, it works. Then, I think the USB driver is correctly installed.

Has anyone an idea? Perhaps the default value I use are not correct?

Re: problem using the flash programmer

fabriceC — Thu, 30 Aug 2007 19:48:22 GMT

I have solved my problems,

my configuration was wrong. To have a correct configuration, the only thing to do was to click on "load settings" and to choose CFM_MCF52233_25MHz.xml.

topic problem using the flash programmer in ColdFire/68K Microcontrollers and Processors

problem using the flash programmer

Re: problem using the flash programmer